{"title":"Access Control Systems","description":"\u003cp style=\"font-size: 1.4em; font-weight: 600; text-align: center; margin-bottom: 1em;\"\u003eCredential Readers, Keypads, and Access Hubs for Secure Entry\u003c\/p\u003e\n\n\u003cp\u003eAccess control systems manage who enters a building, when they enter, and where they go using credential readers, keypads, request-to-exit devices, and centralized access hubs. The lineup from Rosslare, Seco-Larm, Akuvox, and Ubiquiti spans standalone single-door setups to IP-networked multi-door platforms with audit logging and remote management, all part of the \u003ca href=\"\/collections\/security-surveillance\" title=\"Security \u0026amp; Surveillance\"\u003e\u003cstrong\u003esecurity and surveillance\u003c\/strong\u003e\u003c\/a\u003e catalog.\u003c\/p\u003e\n\n\u003ch2\u003eAccess Control Systems for Every Environment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-door offices\u003c\/strong\u003e — standalone keypads and card readers providing PIN or credential-based entry for a single entrance without network infrastructure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-door commercial buildings\u003c\/strong\u003e — IP-based access hubs managing dozens of doors with centralized scheduling, audit logging, and remote lockdown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParking garages and gates\u003c\/strong\u003e — RF transmitters and photobeam sensors providing drive-up access and vehicle detection for barrier and gate systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-traffic lobbies and ADA entries\u003c\/strong\u003e — wave-to-open sensors and request-to-exit devices providing touchless, code-compliant egress from the secure side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhased upgrades from legacy systems\u003c\/strong\u003e — dual-frequency readers accepting both 125 kHz prox cards and modern NFC\/mobile credentials during transition periods\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eChoosing the Right Access Control System\u003c\/h2\u003e\n\u003cp\u003eThe right configuration depends on door count, credential type, and integration requirements. Standalone keypads and single-door readers work well for one to three doors where simplicity matters. IP-based platforms like Ubiquiti's UniFi Access provide centralized control through a web dashboard with scheduled access policies, audit trails, and remote lockdown for larger deployments. Rosslare readers deliver Wiegand output for compatibility with third-party panels, while Seco-Larm keypads and request-to-exit hardware handle standalone entry points and supporting hardware across the access control signal chain.\u003c\/p\u003e\n\n\u003ch3\u003eCredential Types and Compatibility\u003c\/h3\u003e\n\u003cp\u003e125 kHz proximity cards and key fobs remain the most cost-effective option and are universally compatible with third-party panels. 13.56 MHz NFC and mobile-wallet credentials eliminate physical card costs entirely and offer stronger encryption. Dual-frequency readers accept both legacy prox and modern NFC credentials, making them ideal for phased upgrades where not all users transition to new credentials at once. Ubiquiti's G2 and G3 Reader Pro add cloud-managed NFC and Bluetooth through the UniFi Access ecosystem.\u003c\/p\u003e\n\n\u003ch2\u003eComplete Your Access Control Installation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/door-hardware-exit-devices\" title=\"Door Hardware \u0026amp; Exit Devices\"\u003e\u003cstrong\u003eDoor Hardware and Exit Devices\u003c\/strong\u003e\u003c\/a\u003e — electric strikes, magnetic locks, and armored door cords that complete the door side of access control\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/intercoms-door-entry\" title=\"Intercoms \u0026amp; Door Entry\"\u003e\u003cstrong\u003eIntercoms and Door Entry\u003c\/strong\u003e\u003c\/a\u003e — audio and video intercom systems for visitor verification before granting access\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/security-cameras\" title=\"Security Cameras\"\u003e\u003cstrong\u003eSecurity Cameras\u003c\/strong\u003e\u003c\/a\u003e — IP cameras positioned at entry points to visually verify credentials and log entry events\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/ethernet-switches\" title=\"Ethernet Switches\"\u003e\u003cstrong\u003eEthernet Switches\u003c\/strong\u003e\u003c\/a\u003e — PoE switches powering IP-based readers and access hubs over ethernet\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"ubiquiti-unifi-access-reader-junction-box","title":"Ubiquiti UniFi Access Reader Junction Box - Wall and Conduit Mount for Access Readers and Intercom Viewers (UACC-Reader-JB)","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eSurface-Mount Junction Box That Adds Housing Depth and Conduit Access to UniFi Access Reader Installations\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/ubiquiti\"\u003eUbiquiti\u003c\/a\u003e UniFi Access Reader Junction Box (UACC-Reader-JB) is a polycarbonate mounting enclosure designed for UniFi Access Readers and Intercom Viewers. It provides additional housing depth for cable management behind the reader, accepts 3\/4-inch conduit connections for code-compliant wiring, and supports both flat wall and VESA mounting. Available in black and white to match reader and door frame finishes.\u003c\/p\u003e\n\u003cp\u003eAccess reader installations often require more depth behind the device than a standard gang box provides, particularly when conduit runs terminate at the reader location. The UACC-Reader-JB is sized and patterned specifically for UniFi Access hardware, eliminating the need to adapt generic electrical boxes or modify mounting surfaces to fit the reader footprint.\u003c\/p\u003e\n\u003ch3\u003eWhere the Reader Junction Box Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial door access installations\u003c\/strong\u003e where local electrical code requires conduit connections at every device location and a flush-mounted reader needs concealed cable routing behind the faceplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntercom Viewer deployments\u003c\/strong\u003e where the wall surface is concrete, brick, or masonry and the junction box provides a level mounting plane plus depth for cable slack without chasing into the wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrofit installations on existing buildings\u003c\/strong\u003e where surface-run conduit needs a clean termination point at the reader location without cutting into finished walls or door frames\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the Reader Junction Box Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built for UniFi Access hardware:\u003c\/strong\u003e Mounting pattern matches UniFi Access Readers and Intercom Viewers directly. No adapter plates or modifications required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4-inch conduit entry:\u003c\/strong\u003e Standard conduit knockout accepts 3\/4-inch fittings for code-compliant installations. Keeps wiring concealed from the conduit run to the reader.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall and VESA mounting:\u003c\/strong\u003e Mounts directly to flat surfaces or any standard VESA-compatible mount point for flexible placement near doors and entry points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact polycarbonate enclosure:\u003c\/strong\u003e 145 x 88 x 50 mm. Adds just 2 inches of depth behind the reader while providing full cable management space and weather-resistant sealing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ubiquiti Inc.","offers":[{"title":"Black","offer_id":48800133546168,"sku":"UACC-Reader-JBB","price":39.99,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":48800133578936,"sku":"UACC-Reader-JBW","price":37.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/download_5_2.png?v=1744949504"},{"product_id":"rosslare-ay-k12c-proximity-card-reader","title":"Rosslare AY-K12C Mullion Proximity Card Reader - 125 kHz, Wiegand 26-Bit, IP65 Outdoor Rated (AY-K12C)","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eCompact Mullion-Mount Proximity Reader for Narrow Door Frames and Outdoor Access Points\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/rosslareaccesscontrol\"\u003eRosslare\u003c\/a\u003e AY-K12C is a micro mullion-format 125 kHz proximity card reader with Wiegand 26-bit output, built for installations where standard-size readers do not fit. At just 3.15 x 1.34 inches, the AY-K12C mounts directly on narrow aluminum door frames and mullion strips while maintaining full read performance up to 7 cm. IP65-rated and fully potted, it operates reliably in outdoor environments from -31 to 150 degrees Fahrenheit without additional weatherproofing.\u003c\/p\u003e\n\u003cp\u003eThe AY-K12C supports multiple 125 kHz card formats and connects to any \u003ca href=\"\/collections\/security-surveillance\"\u003eaccess control panel\u003c\/a\u003e that accepts Wiegand input. Running on 5 to 16 VDC at just 70 mA, it draws minimal power and works with the same wiring and credentials as larger Rosslare and HID-compatible readers in the same system, making it a drop-in solution for tight locations without changing out cards or controllers.\u003c\/p\u003e\n\u003ch3\u003eWhere the AY-K12C Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNarrow door frame installations\u003c\/strong\u003e where standard card readers are too wide for the available mullion space, and the micro form factor provides a clean mount without obstructing the door hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor entry points and gate access\u003c\/strong\u003e where the IP65-rated, fully potted housing withstands rain, dust, and temperature extremes without degradation in read performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-reader access control systems\u003c\/strong\u003e where certain doors require a smaller reader but the entire system runs on the same Wiegand 26-bit protocol and 125 kHz credentials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the AY-K12C Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro mullion form factor:\u003c\/strong\u003e 3.15 x 1.34 x 0.63 inches fits door frames and narrow mounting surfaces where full-size readers cannot be installed. Surface-mount design with no recessing required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125 kHz multi-format proximity:\u003c\/strong\u003e Reads EM, Rosslare, and other 125 kHz card and tag formats. Wiegand 26-bit output ensures compatibility with virtually any access control panel on the market.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 weatherproof construction:\u003c\/strong\u003e Fully potted polycarbonate and ABS housing seals the electronics against water ingress and dust. Operates from -31 to 150 degrees Fahrenheit for year-round outdoor deployment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-power, wide-voltage operation:\u003c\/strong\u003e Draws only 70 mA at 12 VDC and accepts 5 to 16 VDC input, allowing long cable runs from the access control panel without dedicated power supplies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED and buzzer feedback:\u003c\/strong\u003e External LED and buzzer control lines allow the access control panel to provide visual and audible confirmation of card reads, denials, and system status at the door.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rosslare","offers":[{"title":"Default Title","offer_id":50706784780472,"sku":"AY-K12C","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/Screen_Shot_2025-04-22_at_12.38.38_PM.png?v=1745350736"},{"product_id":"akuvox-c315w-s-indoor-monitor","title":"Akuvox C315W-S Indoor Monitor - 7\" Android Touchscreen, SIP Video Intercom, PoE, WiFi (C315W-S)","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003e7-Inch Android Touchscreen Indoor Station for SIP Video Intercom and Access Control Systems\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/akuvox\"\u003eAkuvox\u003c\/a\u003e C315W-S is a 7-inch Android-based indoor monitor that pairs with Akuvox door stations and third-party SIP intercoms to provide live video, two-way audio, and remote door release from a wall-mounted touchscreen. Running on Android with 1 GB RAM and 8 GB storage, the C315W-S handles SIP v2 communication, H.264 video decoding, and echo-cancelled audio on a 1024 x 600 capacitive display. It connects over PoE (802.3af), WiFi (2.4 GHz), or 12V DC, and includes RS485, a relay output, a bell input, and 8 I\/O channels for integration with \u003ca href=\"\/collections\/security-surveillance\"\u003eaccess control and security\u003c\/a\u003e hardware.\u003c\/p\u003e\n\u003cp\u003eThe C315W-S sits in Akuvox's residential and commercial indoor monitor lineup as the WiFi-enabled variant with a slim 27 mm profile that mounts on standard US or EU wall boxes. Auto-provisioning and web-based management let installers configure fleets of monitors remotely, while the Android platform supports firmware updates and Akuvox SmartPlus app integration for mobile notifications when visitors call.\u003c\/p\u003e\n\u003ch3\u003eWhere the C315W-S Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-tenant apartment buildings\u003c\/strong\u003e where each unit needs a wall-mounted touchscreen to see and speak with visitors at the lobby door station and release the entry lock without leaving the unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial office reception areas\u003c\/strong\u003e where the 7-inch display provides a clean, professional intercom point with live video from SIP door stations and one-touch door release for authorized visitors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidential smart home installations\u003c\/strong\u003e where the Android platform and WiFi connectivity integrate with existing network infrastructure, and the Akuvox SmartPlus app extends intercom functionality to mobile devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the C315W-S Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-inch capacitive touchscreen:\u003c\/strong\u003e 1024 x 600 TFT LCD with 270 cd\/m2 brightness and 800:1 contrast ratio. Projected capacitive touch provides responsive interaction for answering calls, viewing live video, and triggering door release.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSIP v2 video intercom:\u003c\/strong\u003e Standard SIP protocol with H.264 video and G.722 wideband audio. Works with Akuvox door stations and any SIP-compatible intercom, eliminating vendor lock-in on the door station side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE, WiFi, and 12V DC power options:\u003c\/strong\u003e 802.3af PoE on dual 10\/100 Ethernet ports, 2.4 GHz WiFi, or 12V DC adapter. Choose the power and connectivity method that fits the installation without running new wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay, RS485, and 8-channel I\/O:\u003c\/strong\u003e One relay output for electric strikes, RS485 for third-party device control, a bell input, and 8 I\/O channels. The C315W-S integrates into broader access control systems beyond simple intercom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAndroid platform with remote management:\u003c\/strong\u003e Auto-provisioning, web management portal, firmware updates, and configuration backup. The Android OS supports the Akuvox SmartPlus app for push notifications and mobile call forwarding.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Akuvox","offers":[{"title":"Default Title","offer_id":50706785271992,"sku":"C315S-WHITE","price":599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/Screen_Shot_2025-04-22_at_12.23.46_PM.png?v=1745349848"},{"product_id":"seco-larm-e-960-d190q-photoelectric-beam-sensor","title":"Seco-Larm E-960-D190Q Twin Photoelectric Beam Sensor - 190 ft Outdoor Range, IP55, Laser Alignment","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTwin Infrared Photoelectric Beam Sensor with 190 ft Outdoor Range and Built-In Laser Alignment\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e E-960-D190Q is a twin photoelectric beam sensor that creates an invisible infrared detection line across doorways, driveways, fence lines, and perimeter zones up to 190 feet outdoors or 390 feet indoors. The twin-beam design requires both beams to be broken simultaneously before triggering an alarm, which eliminates false alarms from birds, falling leaves, and other single-point interruptions. A built-in laser alignment system makes installation fast and precise, and the IP55 weatherproof housing with anti-frost circuitry keeps the sensor operating reliably in rain, snow, and temperature extremes from -13 to 131 degrees F. It integrates with any \u003ca href=\"\/collections\/security-surveillance\"\u003esecurity alarm panel\u003c\/a\u003e through standard NO\/NC relay and tamper switch outputs.\u003c\/p\u003e\n\u003cp\u003eThe E-960-D190Q runs on 10-30 VAC\/VDC non-polarized input, drawing only 70mA, so it connects to the same power supplies already used in most alarm installations. The variable interrupt speed (50-700 msec) lets installers tune sensitivity to the environment: shorter interrupt times for high-security zones where fast detection matters, longer times for areas with frequent non-threat movement like swinging gates or tree branches near the beam path.\u003c\/p\u003e\n\u003ch3\u003eWhere the E-960-D190Q Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerimeter security for commercial properties\u003c\/strong\u003e where the twin-beam sensor creates an invisible detection line along fence lines, parking lot boundaries, or building perimeters up to 190 feet, triggering the alarm panel when a person breaks both beams\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriveway and gate entry detection\u003c\/strong\u003e where the beam sensor detects vehicles or pedestrians crossing a driveway or approaching a gate, providing an early warning zone before someone reaches the building entrance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor warehouse and restricted area monitoring\u003c\/strong\u003e where the extended 390-foot indoor range covers long hallways, loading docks, or warehouse aisles, and the twin-beam design avoids false alarms from forklifts passing through adjacent zones\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the E-960-D190Q Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e190 ft outdoor \/ 390 ft indoor detection range:\u003c\/strong\u003e Covers long perimeter runs with a single transmitter-receiver pair. The twin infrared beams operate at enough separation to require a human-sized object to break both beams simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in laser alignment system:\u003c\/strong\u003e 650nm laser diode with horizontal adjustment of ±90° and vertical adjustment of ±5°. Alignment LEDs on the receiver confirm signal strength for precise aiming during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP55 weatherproof housing with anti-frost:\u003c\/strong\u003e PC resin enclosure rated for outdoor installation in rain, snow, and dust. Built-in sunlight filtering prevents false triggers from direct sunlight, and anti-frost circuitry keeps the optics clear in freezing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable interrupt speed (50-700 msec):\u003c\/strong\u003e Adjustable beam-break duration threshold lets the installer match sensitivity to the deployment environment. Faster settings detect quick crossings; slower settings filter out brief, non-threat interruptions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNO\/NC alarm relay and NC tamper switch:\u003c\/strong\u003e Standard dry-contact outputs connect directly to any security alarm panel. The tamper switch triggers separately if someone opens the sensor housing, providing an additional layer of anti-defeat protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Is a Photoelectric Beam Sensor?\u003c\/h3\u003e\n\u003cp\u003eA photoelectric beam sensor is a perimeter security device that projects one or more invisible infrared beams between a transmitter and a receiver. When a person or object breaks the beam, the receiver detects the interruption and sends an alarm signal to the connected security panel. Twin-beam models like the E-960-D190Q require both beams to be broken at the same time, which significantly reduces false alarms caused by small animals, debris, or weather. Photoelectric beam sensors are used for outdoor perimeter protection, driveway detection, and indoor restricted-area monitoring where motion detectors would be impractical due to range or environmental conditions.\u003c\/p\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706785501368,"sku":"E-960-D190Q","price":122.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/Screen_Shot_2025-04-04_at_7.37.28_AM.png?v=1743777465"},{"product_id":"seco-larm-hl-951t1-sq-gate-remote-control","title":"Seco-Larm HL-951T1-SQ 1-Button Gate Remote Control - 900MHz, 1800 ft Range, IP68 Waterproof","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003e1-Button 900MHz RF Transmitter with 1,800 ft Range, IP68 Waterproof Rating, and 20+ Nonillion Code Combinations\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e HL-951T1-SQ is a single-button 900MHz RF transmitter that provides long-range wireless control for gate operators, door strikes, barriers, and relay-based automation systems. Operating on the 917MHz frequency, it delivers reliable signal transmission up to 1,800 feet (550 m) line-of-sight using an internal PCB antenna that eliminates external antenna breakage. The IP68 waterproof rating means the transmitter withstands complete submersion, making it suitable for outdoor use in any weather condition. It pairs with any Seco-Larm HL-Series receiver for \u003ca href=\"\/collections\/security-surveillance\"\u003eaccess control and security\u003c\/a\u003e applications.\u003c\/p\u003e\n\u003cp\u003eThe HL-951T1-SQ uses advanced digital modulation with over 20 nonillion possible code combinations (20 x 10^30), making the signal virtually impossible to intercept or duplicate. This level of code security goes far beyond the rolling codes used by consumer gate opener remotes, positioning the HL-Series as a professional-grade solution for commercial and high-security residential gate and door control. The compact form factor (34 x 78 x 12.6 mm) runs on a standard CR-2032 coin cell battery (included).\u003c\/p\u003e\n\u003ch3\u003eWhere the HL-951T1-SQ Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial gate and barrier control\u003c\/strong\u003e where security personnel and authorized users need a waterproof, long-range transmitter to open gates, barriers, and parking lot arms from up to 1,800 feet away\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidential driveway gate access\u003c\/strong\u003e where the homeowner needs a compact, pocket-sized remote that operates the gate from the driveway or approaching vehicle without exposing the transmitter to signal cloning or code grabbing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless relay activation\u003c\/strong\u003e where the transmitter triggers a relay-based device such as a door strike, magnetic lock release, lighting system, or alarm control output through an HL-Series receiver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the HL-951T1-SQ Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,800 ft (550 m) line-of-sight range:\u003c\/strong\u003e The 917MHz operating frequency provides excellent range and penetration through obstacles. Internal PCB antenna design means no external parts to break, bend, or misalign.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP68 waterproof rating:\u003c\/strong\u003e Survives complete submersion in water. The sealed housing protects the electronics from rain, snow, dust, and accidental drops in puddles or pools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20+ nonillion code combinations:\u003c\/strong\u003e Advanced digital modulation generates over 20 x 10^30 possible codes. This level of code complexity makes the signal effectively immune to code grabbing, brute force attacks, and signal duplication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact single-button design:\u003c\/strong\u003e One button triggers one channel on the paired HL-Series receiver. The slim profile (34 x 78 x 12.6 mm) fits easily on a keychain, in a pocket, or in a vehicle console.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCR-2032 battery included:\u003c\/strong\u003e Ships ready to use with a standard CR-2032 coin cell. Battery replacement is straightforward with no tools required.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706785861816,"sku":"HL-951T1-SQ","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/seco2.webp?v=1736741428"},{"product_id":"seco-larm-hl-951t2-sq-long-range-remote-control","title":"Seco-Larm HL-951T2-SQ 2-Button Long Range Remote Control - 900MHz, 1800 ft, IP68, 3-Channel","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003e2-Button 900MHz Long Range Remote Control with 3 Channels, 5 Output Modes, and IP68 Waterproof Housing\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e HL-951T2-SQ is a 2-button, 3-channel 900MHz RF transmitter that provides long range wireless control up to 1,800 feet (550 m) line-of-sight for gate operators, door strikes, barriers, lighting, and relay-based automation. The dual buttons give independent control over two devices or trigger both simultaneously on a third channel, and five individually programmable output modes let installers configure each channel for momentary, latching, timed, or conditional operation through the paired HL-Series receiver. The IP68 waterproof housing and internal PCB antenna make the transmitter durable enough for daily outdoor use in \u003ca href=\"\/collections\/security-surveillance\"\u003esecurity and access control\u003c\/a\u003e installations.\u003c\/p\u003e\n\u003cp\u003eThe HL-951T2-SQ uses advanced digital modulation with over 20 nonillion possible code combinations, making the signal virtually impossible to intercept or clone. Each channel supports up to 99 programmed button codes, so a single HL-Series receiver can manage access for up to 99 users per channel without a separate access control panel. Switch-based programming (no jumper cuts required) and a built-in RF signal strength test mode simplify installation and site verification.\u003c\/p\u003e\n\u003ch3\u003eWhere the HL-951T2-SQ Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-device gate and door control\u003c\/strong\u003e where one button opens the main gate and the second button controls a pedestrian gate, garage door, or secondary entry point, all from a single transmitter in the vehicle or on a keychain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial parking and access systems\u003c\/strong\u003e where up to 99 transmitters per channel can be enrolled on a single HL-Series receiver, providing managed access for tenants, employees, or authorized vehicles without additional controller hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless automation triggers\u003c\/strong\u003e where each button activates a different relay output for lighting, irrigation, signage, or alarm functions, with five programmable output modes giving full control over how the receiver responds to each press\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the HL-951T2-SQ Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,800 ft (550 m) line-of-sight range:\u003c\/strong\u003e The 917MHz frequency delivers long range signal transmission with strong obstacle penetration. Internal PCB antenna eliminates breakable external parts and maintains consistent RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 buttons, 3 channels, 5 output modes:\u003c\/strong\u003e Button 1 and Button 2 each control their own channel, and pressing both simultaneously activates a third channel. Five programmable output modes per channel (set at the receiver) cover momentary, latching, timed, and conditional responses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e99 transmitter codes per channel:\u003c\/strong\u003e The paired HL-Series receiver stores up to 99 unique transmitter codes per channel, making it practical for multi-user gate and parking access without a separate access control panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP68 waterproof with LED indicator:\u003c\/strong\u003e Fully sealed housing rated for submersion. The LED indicator confirms transmission and assists with programming and signal strength testing during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20+ nonillion code combinations:\u003c\/strong\u003e Advanced digital modulation generates over 20 x 10^30 possible codes, making the transmission immune to code grabbing and brute force attacks used against consumer-grade rolling code systems.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706786156728,"sku":"HL-951T2-SQ","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/seco1_442b7798-5ec0-4c0a-af49-fa0eae726e6a.webp?v=1736950450"},{"product_id":"rosslare-sa-23-b2g-rf-key-fob","title":"Rosslare SA-23-B2G Dual Channel RF Key Fob Transmitter - 70m Range, Wiegand, Access Control","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eDual-Channel RF Key Fob Transmitter with 70-Meter Range and Wiegand Output for Long-Range Access Control\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/rosslareaccesscontrol\"\u003eRosslare\u003c\/a\u003e SA-23-B2G is a dual-channel RF key fob transmitter that sends wireless signals to the AY-L23G outdoor long-range RF reader from up to 70 meters away. Each of the two channels supports independent Wiegand output formats, allowing a single key fob to control two separate doors, gates, or access zones from the same device. The compact key fob form factor clips to a keychain or fits in a pocket for convenient hands-free \u003ca href=\"\/collections\/security-surveillance\"\u003eaccess control\u003c\/a\u003e at vehicle gates, parking structures, and building entry points.\u003c\/p\u003e\n\u003cp\u003eThe SA-23-B2G operates as part of the Rosslare long-range RF access control system, where the key fob transmitter communicates wirelessly with the AY-L23G reader mounted at the access point. The 70-meter operating range covers the approach distance for vehicle gates and parking facilities, giving drivers time to trigger the reader before reaching the barrier. The dual-channel design handles two-zone configurations without requiring separate credentials for each zone.\u003c\/p\u003e\n\u003ch3\u003eWhere the SA-23-B2G Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGated communities and parking facilities\u003c\/strong\u003e where drivers need to open a vehicle gate from inside the car, and the 70-meter RF range triggers the reader well before the vehicle reaches the barrier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial properties with multiple entry points\u003c\/strong\u003e where each channel on the key fob maps to a different door or gate, giving authorized personnel single-fob access to two separate zones\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarehouse and industrial yards\u003c\/strong\u003e where outdoor access points need long-range wireless credentials that work reliably in open-air environments without requiring close proximity to the reader\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SA-23-B2G Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-channel RF transmission:\u003c\/strong\u003e Two independently programmable channels on a single key fob. Each channel supports a different Wiegand output format for controlling two separate access points or zones from one credential.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70-meter operating range:\u003c\/strong\u003e Long-range RF communication reaches the AY-L23G reader from up to 70 meters away, providing hands-free activation for vehicle gates and distant entry points without stopping or rolling down a window.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiegand-compatible output:\u003c\/strong\u003e Programmable Wiegand output formats integrate with standard access control panels and controllers. The dual-channel Wiegand configuration supports multi-zone access architectures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact key fob form factor:\u003c\/strong\u003e The durable key fob housing clips to a keychain or lanyard for everyday carry. The compact size fits comfortably in a pocket or vehicle console for quick access when approaching a controlled entry point.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rosslare","offers":[{"title":"Default Title","offer_id":50706791661752,"sku":"SA-23-B2G","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/rosslare.webp?v=1736284556"},{"product_id":"seco-larm-sd-6176-ss1q-push-to-exit-button","title":"Seco-Larm SD-6176-SS1Q Outdoor Piezoelectric Push to Exit Button - IP65, Stainless Steel, LED","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eIP65 Weatherproof Piezoelectric Exit Button with Programmable LED Ring, Stainless Steel Faceplate, and SPDT Relay Output for Indoor and Outdoor Access Control\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e SD-6176-SS1Q is a piezoelectric push to exit button with no moving parts, an IP65-rated weatherproof housing, and a stainless steel faceplate built for high-traffic indoor and outdoor \u003ca href=\"\/collections\/security-surveillance\"\u003eaccess control\u003c\/a\u003e installations. The touch-activated piezoelectric sensor eliminates mechanical wear, making the button reliable in environments where traditional pushbuttons fail from repeated use, vandalism, or moisture exposure. A programmable ring LED provides visible activation feedback with reversible red-to-green or green-to-red color sequences, and the SPDT relay output rated at 2.5A at 24 VAC\/VDC integrates directly with electric strikes, magnetic locks, and access control panels.\u003c\/p\u003e\n\u003cp\u003eThe SD-6176-SS1Q operates on 12 to 24 VDC and draws 40mA at 12VDC in standby. The relay output mode is adjustable from 1 to 30 seconds timed release or toggle operation, matching the requirements of different door hardware configurations. The slimline stainless steel faceplate resists corrosion, cleaning chemicals, and physical abuse in demanding environments. ETL listed and conforming to UL Standard 294, the button meets the code requirements for commercial egress control installations.\u003c\/p\u003e\n\u003ch3\u003eWhere the SD-6176-SS1Q Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor gates and parking garages\u003c\/strong\u003e where the exit button is exposed to rain, humidity, and temperature swings, and the IP65 rating and stainless steel construction prevent corrosion and water intrusion that would disable a standard mechanical button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHospitals, clean rooms, and food processing facilities\u003c\/strong\u003e where a touch-activated button with no moving parts supports hygiene protocols and withstands repeated cleaning with disinfectants and chemical agents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchools, warehouses, and high-traffic commercial doors\u003c\/strong\u003e where the piezoelectric sensor handles thousands of daily activations without mechanical fatigue, and the programmable LED ring confirms each activation to the user\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SD-6176-SS1Q Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiezoelectric touch activation with no moving parts:\u003c\/strong\u003e The solid-state sensor responds to a light touch without any mechanical button travel. No springs, no contacts to wear out, and no gap for moisture or debris to enter the switch mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 weatherproof rating:\u003c\/strong\u003e Full protection against dust ingress and low-pressure water jets from any direction. The sealed housing and stainless steel faceplate handle direct outdoor exposure without degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable ring LED with color feedback:\u003c\/strong\u003e The LED ring around the touch zone changes color on activation with a reversible red-to-green or green-to-red sequence. Visual feedback confirms the button press registered and the relay fired.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPDT relay output at 2.5A:\u003c\/strong\u003e The relay output rated at 2.5A at 24 VAC\/VDC drives electric strikes, magnetic locks, and gate operators directly. Adjustable timing from 1 to 30 seconds or toggle mode matches any door hardware configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eETL listed, UL 294 compliant:\u003c\/strong\u003e Third-party tested and listed to meet UL Standard 294 for access control system equipment. The ETL listing satisfies building code and insurance requirements for commercial egress installations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706791760056,"sku":"SD-6176-SS1Q","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/seco1_b92f10e2-3b5a-4e79-9b34-03409787c526.webp?v=1736958751"},{"product_id":"seco-larm-sd-7103gc-peq-request-to-exit-plate","title":"Seco-Larm SD-7103GC-PEQ Slimline Illuminated Request to Exit Button - Stainless Steel, Multilingual","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eSlimline Illuminated Request to Exit Plate with DPST Switch, Multilingual Faceplates, and Brushed Stainless Steel for Narrow-Frame Door Installations\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e SD-7103GC-PEQ is a slimline illuminated request to exit button that fits narrow door frames and mullion-mount locations where a standard single-gang exit plate is too wide. The 4-1\/2 in. x 1-1\/2 in. brushed stainless steel faceplate houses a large illuminated pushbutton with a green LED backlight rated for 35,000 hours, and the momentary DPST switch provides both normally open and normally closed contacts rated at 5A at 24VAC for direct integration with \u003ca href=\"\/collections\/security-surveillance\"\u003eaccess control\u003c\/a\u003e panels, electric strikes, and magnetic locks.\u003c\/p\u003e\n\u003cp\u003eThe SD-7103GC-PEQ includes interchangeable multilingual faceplates in English, Spanish, and French for installations that require signage in multiple languages. The rubber-sealed switch resists liquid intrusion in protected outdoor and indoor environments, and six 12-inch color-coded wire leads with spade lugs simplify wiring to the access control system. The unit operates on 12 to 24 VAC\/VDC with no external resistor required for the LED. ETL listed and conforming to UL Standard 294 for commercial egress installations.\u003c\/p\u003e\n\u003ch3\u003eWhere the SD-7103GC-PEQ Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNarrow door frames and mullion mounts\u003c\/strong\u003e where a standard single-gang exit plate does not fit, and the 1-1\/2 inch wide slimline faceplate provides a clean installation on narrow stiles and metal frames\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial offices and retail storefronts\u003c\/strong\u003e where the illuminated pushbutton gives employees and visitors clear visual guidance for exiting through access-controlled doors during and after business hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultilingual facilities and public buildings\u003c\/strong\u003e where building codes or corporate policy require exit signage in English, Spanish, and French, and the interchangeable faceplates satisfy all three language requirements from a single unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SD-7103GC-PEQ Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlimline 1-1\/2 inch wide faceplate:\u003c\/strong\u003e The 4-1\/2 in. x 1-1\/2 in. x 1-15\/16 in. brushed stainless steel plate fits narrow door frames and mullion mounts where standard single-gang plates cannot be installed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDPST switch with N.O. and N.C. contacts:\u003c\/strong\u003e The momentary switch rated at 5A at 24VAC provides both normally open and normally closed outputs for flexible wiring to access control panels, electric strikes, and magnetic locks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreen LED illumination with 35,000-hour lifespan:\u003c\/strong\u003e The backlit pushbutton provides high-visibility activation guidance in low-light corridors and entry vestibules. The LED operates on 12 to 24 VAC\/VDC with no external resistor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable multilingual faceplates:\u003c\/strong\u003e English, Spanish, and French exit message plates included. Field-swappable design lets installers match the faceplate language to the facility requirements without ordering separate units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eETL listed, UL 294 compliant:\u003c\/strong\u003e Third-party tested and listed for commercial access control egress installations. Meets building code and insurance requirements for permanent exit button installations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706791923896,"sku":"SD-7103GC-PEQ","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/sec1.jpg?v=1736959381"},{"product_id":"seco-larm-sd-7202gc-peq-illuminated-exit-button","title":"Seco-Larm SD-7202GC-PEQ Square Illuminated Exit Button - 50A, IP65, Stainless Steel, Multilingual","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeavy-Duty Illuminated Exit Button with 50A Switch Rating, IP65 Weatherproof Housing, and Multilingual Faceplates for Commercial Access Control\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e SD-7202GC-PEQ is a single-gang illuminated exit button with a 50A switch rating at 24VAC that handles the heaviest commercial egress loads including high-amperage electric strikes, gate operators, and magnetic lock circuits. The large square pushbutton features a green LED backlight rated for over 50,000 hours, and the IP65-rated stainless steel faceplate withstands moisture, dust, and physical abuse in indoor and protected outdoor \u003ca href=\"\/collections\/security-surveillance\"\u003eaccess control\u003c\/a\u003e installations. Three interchangeable multilingual message plates in English, Spanish, and French are included for code-compliant installations.\u003c\/p\u003e\n\u003cp\u003eThe SD-7202GC-PEQ mounts in a standard single-gang electrical box and operates on 12 to 24 VDC with no external resistor required for the LED. Five 12-inch color-coded wire leads with spade lugs connect directly to the access control panel or door hardware. The 50A contact rating gives this exit button the capacity to drive high-draw devices that exceed the ratings of standard exit buttons, making it the right choice for heavy-duty gate and door hardware. ETL listed and conforming to UL Standard 294.\u003c\/p\u003e\n\u003ch3\u003eWhere the SD-7202GC-PEQ Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial doors with high-amperage hardware\u003c\/strong\u003e where the 50A switch rating directly drives electric strikes, magnetic locks, and automated door operators that exceed the contact ratings of standard exit buttons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParking garages and vehicle gates\u003c\/strong\u003e where the IP65 weatherproof rating and stainless steel construction handle exposure to moisture, dust, and vehicle exhaust in semi-outdoor environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublic buildings and multilingual facilities\u003c\/strong\u003e where fire codes or ADA compliance require exit signage in multiple languages, and the included English, Spanish, and French faceplates meet the requirement from a single installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SD-7202GC-PEQ Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50A switch rating at 24VAC:\u003c\/strong\u003e The heavy-duty contact rating handles high-amperage egress loads that would damage standard 3A to 5A exit buttons. Directly drives gate operators, large electric strikes, and magnetic lock circuits without an interposing relay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 weatherproof stainless steel construction:\u003c\/strong\u003e The single-gang stainless steel faceplate and sealed switch housing resist water jets, dust, and corrosion in protected outdoor and indoor environments. The 4-1\/2 in. x 2-3\/4 in. plate fits standard single-gang electrical boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreen LED illumination with 50,000-hour lifespan:\u003c\/strong\u003e The large backlit pushbutton provides high-visibility activation guidance in corridors, stairwells, and dimly lit exit areas. The LED operates on 12 to 24 VDC with no external resistor required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable multilingual faceplates:\u003c\/strong\u003e English, Spanish, and French exit message plates swap in the field without tools. One SKU satisfies multilingual signage requirements for code-compliant commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eETL listed, UL 294 compliant:\u003c\/strong\u003e Third-party tested and listed to UL Standard 294 for access control equipment. Meets building code and insurance requirements for permanent commercial egress button installations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706792153272,"sku":"SD-7202GC-PEQ","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/SD-7202GC-PEQ_1440x1440_e1fb3c2c-845a-43e6-b107-9a3a5ffc4ad0.png?v=1741587707"},{"product_id":"seco-larm-sd-9163-ksvq-no-touch-exit-button","title":"Seco-Larm SD-9163-KSVQ No Touch Exit Button - IP65 Outdoor Wave Sensor, IR, Stainless Steel","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTouchless IR Wave-to-Open Exit Sensor with Adjustable Detection Range, Manual Override, and IP65 Weatherproof Stainless Steel Housing\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e SD-9163-KSVQ is a no touch exit button that uses an infrared wave sensor to trigger door hardware without physical contact. A simple hand wave within the adjustable 2 to 7 inch detection range activates the SPDT relay output rated at 1.2A at 24VDC, releasing electric strikes, magnetic locks, or automatic door operators. The IP65-rated stainless steel slimline housing withstands outdoor exposure, and a built-in manual override pushbutton provides backup activation if the IR sensor is obstructed. The SD-9163-KSVQ fits \u003ca href=\"\/collections\/security-surveillance\"\u003eaccess control\u003c\/a\u003e installations where touchless egress supports hygiene protocols, ADA accessibility, or hands-free convenience at controlled doors.\u003c\/p\u003e\n\u003cp\u003eThe wave sensor operates on 12 to 24 VDC and draws a maximum of 28mA when triggered, with a 12 to 15mA standby draw. The relay trigger duration is adjustable from 0.5 to 30 seconds or toggle mode, matching the timing requirements of different door hardware. A selectable LED indicator changes from red to green or green to red on activation, providing visual confirmation that the sensor detected the wave and fired the relay. The 1-1\/2 in. x 4-1\/2 in. slimline faceplate fits narrow door frames, mullion mounts, and post-mount applications.\u003c\/p\u003e\n\u003ch3\u003eWhere the SD-9163-KSVQ Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHospitals, clinics, and clean rooms\u003c\/strong\u003e where touchless activation prevents cross-contamination at controlled doors, and staff carrying equipment or wearing gloves can wave to exit without touching a button surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor gates and parking structures\u003c\/strong\u003e where the IP65 weatherproof housing handles rain, humidity, and temperature swings, and the adjustable IR range prevents false triggers from passing traffic or debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADA-compliant commercial exits\u003c\/strong\u003e where hands-free activation provides accessible egress for individuals with limited mobility or dexterity, and the manual override button serves as a backup activation method\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SD-9163-KSVQ Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable IR detection range from 2 to 7 inches:\u003c\/strong\u003e The infrared wave sensor tunes to the installation environment. Short range prevents false triggers in high-traffic areas, while extended range provides activation distance for hands-free convenience.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPDT relay output at 1.2A with adjustable timing:\u003c\/strong\u003e The dry contact relay drives electric strikes, magnetic locks, and door operators directly. Trigger duration adjusts from 0.5 to 30 seconds or toggle mode to match the door hardware requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 weatherproof stainless steel construction:\u003c\/strong\u003e The slimline 1-1\/2 in. x 4-1\/2 in. stainless steel faceplate and sealed sensor housing resist water, dust, and corrosion in outdoor and semi-outdoor installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in manual override pushbutton:\u003c\/strong\u003e A physical pushbutton behind the faceplate provides backup activation if the IR sensor is blocked or disabled. The override ensures egress is always available regardless of sensor status.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable LED color feedback:\u003c\/strong\u003e The LED indicator changes color on activation with a configurable red-to-green or green-to-red sequence. Visual feedback confirms the sensor detected the hand wave and triggered the relay output.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706792349880,"sku":"SD-9163-KSVQ","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/sec1_46094cf3-913f-450f-99da-8e75ef47e552.webp?v=1736959848"},{"product_id":"seco-larm-sh-816s-bq-outdoor-alarm-siren","title":"Seco-Larm SH-816S-BQ Outdoor Alarm Siren - 120dB, 25W Speaker, IP65 Weatherproof, Tamper Protected","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003e120dB Self-Contained Alarm Siren with 25W Speaker, IP65 Weatherproof Housing, Built-In Tamper Protection, and Surface or Gang Box Mounting for Indoor and Outdoor Security Installations\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e SH-816S-BQ is a 120dB self-contained alarm siren with an integrated 25W speaker that combines high-output warble-tone alerting and audio broadcasting in a single IP65-rated enclosure for indoor and outdoor security installations. The SH-816S-BQ operates on 9 to 15 VDC with a maximum current draw of 870mA, mounts to wall surfaces or standard gang boxes, and includes built-in tamper protection that triggers an output when the housing is opened or removed.\u003c\/p\u003e\n\u003cp\u003eThe SH-816S-BQ serves dual roles as both a siren and a public address speaker, accepting broadcast audio input alongside its built-in warble-tone generator. The broadcast input interrupts siren output during use, allowing voice announcements to override the alarm tone. At 6-1\/8 x 4-15\/16 x 4-1\/2 inches, the compact enclosure fits standard outdoor alarm installations while the IP65 rating protects against water jets and dust ingress for reliable year-round operation.\u003c\/p\u003e\n\u003ch3\u003eWhere the SH-816S-BQ Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerimeter security and outdoor alarm installations\u003c\/strong\u003e where the 120dB warble-tone siren provides audible deterrence across large areas, the IP65-rated housing withstands rain, dust, and temperature extremes, and surface or gang box mounting options adapt to walls, fences, and building exteriors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial and industrial alarm panel integration\u003c\/strong\u003e where the 9 to 15 VDC operating range connects directly to alarm panel siren outputs, built-in tamper protection feeds back to the panel when the housing is disturbed, and the 870mA maximum draw stays within standard alarm panel current budgets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined siren and public address applications\u003c\/strong\u003e where the 25W speaker accepts broadcast audio input for voice announcements and emergency instructions, the broadcast input overrides the siren tone during use, and the single-unit design eliminates the need for separate siren and speaker installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SH-816S-BQ Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e120dB Warble-Tone Siren:\u003c\/strong\u003e Built-in warble-tone generator produces 120dB output for effective audible alerting across large indoor and outdoor spaces. The high-output siren provides the deterrence volume required for commercial and industrial security installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25W Integrated Speaker:\u003c\/strong\u003e 25-watt peak speaker accepts broadcast audio input for voice announcements, emergency instructions, and public address functions. Broadcast input interrupts siren output during use, enabling voice-over-alarm capability from a single device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 Weatherproof Housing:\u003c\/strong\u003e IP65-rated enclosure protects against water jets and dust ingress for reliable outdoor operation in all weather conditions. The compact 6-1\/8 x 4-15\/16 x 4-1\/2 inch housing mounts to wall surfaces or standard single and double gang boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Tamper Protection:\u003c\/strong\u003e Tamper output rated at 100mA at 30V AC\/DC triggers when the housing is opened or removed from its mount. The tamper circuit connects to alarm panel tamper zones for immediate notification of physical interference with the siren.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706793300152,"sku":"SH-816S-BQ","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/SH-816S-BQ_600x600_850e3737-18da-4542-908f-164470463b85.png?v=1741586513"},{"product_id":"seco-larm-sk-1123-sdq-access-control-keypad","title":"Seco-Larm SK-1123-SDQ Access Control Keypad - Vandal Resistant, IP66 Outdoor, Dual Relay, 1,000 Users","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eVandal-Resistant Outdoor Access Control Keypad with IP66 Weatherproof Aluminum Housing, Dual Form C Relays, 1,000 User Codes, Duress and Visitor Code Support, and EEPROM Memory for Gate, Door, and Perimeter Security Installations\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e SK-1123-SDQ is a vandal-resistant outdoor access control keypad with an IP66-rated aluminum housing, dual Form C relay outputs, and capacity for 1,000 user codes, 50 visitor codes, and 50 duress codes. The SK-1123-SDQ operates on 12 to 24 VDC\/VAC with a maximum current draw of 160mA, mounts to wall surfaces, and is fully programmable from the LED backlit keypad without requiring an external programming device.\u003c\/p\u003e\n\u003cp\u003eThe SK-1123-SDQ supports anti-tailgating through dedicated door sensor and interlock inputs, with EEPROM memory that retains all programmed codes during power loss. The dual Form C relays are each rated at 1A at 30VDC with programmable output timing up to 99,999 seconds or toggle mode, giving installers the flexibility to control two independent access points or trigger a secondary output for duress notification. At 4-15\/16 x 3-1\/8 x 2-1\/16 inches and 1 pound 2 ounces, the compact aluminum enclosure withstands physical attack and operates in temperatures from -4 to 158 degrees Fahrenheit with humidity up to 95 percent non-condensing.\u003c\/p\u003e\n\u003ch3\u003eWhere the SK-1123-SDQ Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor gates, doors, and perimeter access points\u003c\/strong\u003e where the IP66-rated aluminum housing withstands rain, dust, and physical tampering, the LED backlit keypad provides visibility in low-light conditions, and the operating temperature range of -4 to 158 degrees Fahrenheit covers year-round outdoor installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial and industrial facilities requiring multi-user access control\u003c\/strong\u003e where 1,000 user codes on output 1 and 100 user codes on output 2 handle large workforces, 50 visitor codes provide temporary access without sharing permanent credentials, and 50 duress codes trigger a silent alert when entered under threat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-door and dual-relay security installations\u003c\/strong\u003e where the two independent Form C relay outputs at 1A at 30VDC control separate doors, gates, or alarm outputs from a single keypad, programmable output timing up to 99,999 seconds or toggle mode adapts to electric strikes, magnetic locks, and gate operators, and anti-tailgating inputs prevent unauthorized follow-through\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SK-1123-SDQ Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Vandal-Resistant Aluminum Housing:\u003c\/strong\u003e Die-cast aluminum enclosure with IP66 weatherproof rating protects against high-pressure water jets and complete dust ingress for reliable outdoor operation. The tamper output triggers at 50mA at 24VDC when the housing is disturbed, feeding back to alarm panels for immediate notification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000 User Codes with Visitor and Duress Support:\u003c\/strong\u003e Stores 1,000 user codes for relay output 1, 100 user codes for relay output 2, 50 visitor codes for temporary access, and 50 duress codes for silent alarm activation. EEPROM memory retains all programmed codes during power loss without battery backup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Form C Relay Outputs:\u003c\/strong\u003e Two independent Form C relay outputs rated at 1A at 30VDC support electric strikes, magnetic locks, gate operators, and auxiliary alarm outputs. Programmable output timing from momentary to 99,999 seconds and toggle mode provides the flexibility required for any access control application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeypad-Programmable with Anti-Tailgating:\u003c\/strong\u003e All user codes, timing, and system settings are programmed directly from the LED backlit keypad without an external device. Dedicated door sensor, interlock, and inhibit inputs provide anti-tailgating protection and door-forced-open detection for comprehensive access security.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706793332920,"sku":"SK-1123-SDQ","price":135.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/SK-1123-SDQ_230810_1440x1440_29c2e9d0-1b10-4f00-a9c9-e610aecb932a.png?v=1741586366"},{"product_id":"seco-larm-sk-2323-sdq-weatherproof-keypad","title":"Seco-Larm SK-2323-SDQ Weatherproof Keypad - Mullion Style, IP65 Outdoor, Dual Relay, 1,010 Users","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eMullion-Style Weatherproof Keypad with IP65 Aluminum Housing, Epoxy-Potted Circuitry, Dual Form C Relays, 1,010 User Codes, Optical Tamper Sensor, and EEPROM Memory for Outdoor Access Control Installations\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e SK-2323-SDQ is a mullion-style weatherproof keypad with an IP65-rated aluminum housing, dual Form C relay outputs, and capacity for 1,010 user codes across two outputs. The SK-2323-SDQ operates on 12 to 24 VAC\/VDC with a standby current draw of 64mA, features epoxy-potted circuitry for moisture protection, and is fully programmable from the backlit keypad without an external device.\u003c\/p\u003e\n\u003cp\u003eThe slim 6 x 1-3\/4 x 15\/16 inch mullion profile fits narrow door frames and tight mounting locations where standard-width keypads cannot be installed. The SK-2323-SDQ includes an optical tamper sensor, EEPROM memory that retains all programmed codes during power loss, and two egress inputs with a door sensor input for anti-tailgating. The dual Form C relays are each rated at 1A at 30VDC with programmable output timing from 1 to 99 seconds or toggle mode, and the LED backlit keys are rated for 60,000 hours of operation.\u003c\/p\u003e\n\u003ch3\u003eWhere the SK-2323-SDQ Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNarrow door frames and mullion-mount access points\u003c\/strong\u003e where the slim 6 x 1-3\/4 x 15\/16 inch profile fits locations that standard-width keypads cannot accommodate, the IP65-rated aluminum housing with epoxy-potted circuitry withstands rain, dust, and moisture, and the operating temperature range of -4 to 122 degrees Fahrenheit covers year-round outdoor deployment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall to medium commercial facilities with moderate user counts\u003c\/strong\u003e where 1,000 user codes on output 1 and 10 user codes on output 2 serve staff access and secondary functions, all programming is performed directly from the backlit keypad without an external device, and EEPROM memory retains codes through power interruptions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-exposed gate and door installations requiring tamper protection\u003c\/strong\u003e where the optical tamper sensor detects housing interference, the door sensor input supports anti-tailgating detection, and the dual Form C relay outputs at 1A at 30VDC control electric strikes, magnetic locks, or gate operators with programmable timing up to 99 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SK-2323-SDQ Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 Mullion-Style Aluminum Housing:\u003c\/strong\u003e Slim 6 x 1-3\/4 x 15\/16 inch profile fits narrow door frames and tight mounting locations. The IP65-rated aluminum housing with epoxy-potted circuitry protects against water jets and dust ingress, weighing just 11 ounces for secure mounting on any surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,010 User Codes with Dual Form C Relays:\u003c\/strong\u003e Stores 1,000 user codes for relay output 1 and 10 user codes for relay output 2, each controlling an independent Form C relay rated at 1A at 30VDC. Programmable output timing from 1 to 99 seconds or toggle mode adapts to electric strikes, magnetic locks, and gate operators.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical Tamper Sensor with EEPROM Memory:\u003c\/strong\u003e Built-in optical tamper sensor detects housing interference for immediate alarm notification. EEPROM memory retains all programmed codes and settings during power loss without battery backup, maintaining system integrity through outages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeypad-Programmable with 60,000-Hour LED Life:\u003c\/strong\u003e All user codes, timing, and system settings are programmed directly from the backlit keypad without an external device. LED backlit keys rated for 60,000 hours provide visibility in low-light conditions with extended service life.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706793431224,"sku":"SK-2323-SDQ-","price":106.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/sec1.webp?v=1736959178"},{"product_id":"seco-larm-sk-919t1-gbq-315mhz-remote","title":"Seco-Larm SK-919T1-GBQ 315MHz Remote - 1-Button RF Transmitter, IP66 Waterproof, 68 Billion Codes","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003e1-Button 315MHz RF Remote Transmitter with IP66 Waterproof Housing, 68 Billion Code Combinations, Anti-Scan Protection, FCC and IC Certification, and Keychain-Ready Pendant Design for Seco-Larm Gate and Access Control Systems\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e SK-919T1-GBQ is a 1-button 315MHz RF remote transmitter with an IP66 waterproof housing and over 68 billion code combinations for secure wireless control of gates, doors, and access control systems. The SK-919T1-GBQ is pre-coded and compatible with all Seco-Larm 315MHz RF receivers, features anti-scan protection against code capture, and includes an LED transmission indicator that confirms signal output when the button is pressed.\u003c\/p\u003e\n\u003cp\u003eThe compact pendant design measures just 1-1\/4 x 2-3\/16 x 5\/16 inches and attaches to keychains, lanyards, and belt clips for convenient daily carry. The SK-919T1-GBQ operates on a single CR2032 battery (replacement model X-930-096) and is FCC and IC certified for authorized wireless transmission in the United States and Canada.\u003c\/p\u003e\n\u003ch3\u003eWhere the SK-919T1-GBQ Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGate and garage door remote control\u003c\/strong\u003e where the 315MHz RF signal provides reliable wireless activation of Seco-Larm receivers, the IP66 waterproof housing withstands rain and outdoor exposure on keychains, and the single-button design delivers one-touch operation for daily entry and exit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess control and alarm system activation\u003c\/strong\u003e where the pre-coded transmitter pairs with Seco-Larm 315MHz receivers for arm\/disarm functions, 68 billion code combinations with anti-scan protection prevent unauthorized code capture, and the compact pendant design provides convenient carry for employees and residents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement or additional remotes for existing Seco-Larm 315MHz systems\u003c\/strong\u003e where pre-coded operation enables immediate pairing with compatible receivers without programming equipment, the FCC and IC certified 315MHz frequency matches existing Seco-Larm installations, and the CR2032 battery provides extended operation with easy field replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SK-919T1-GBQ Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e315MHz RF Transmission with 68 Billion Codes:\u003c\/strong\u003e Pre-coded 315MHz transmitter provides over 68 billion code combinations for secure wireless communication with all Seco-Larm 315MHz receivers. Anti-scan protection prevents unauthorized devices from capturing and replaying the transmission code.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Waterproof Pendant Design:\u003c\/strong\u003e Compact 1-1\/4 x 2-3\/16 x 5\/16 inch pendant housing with IP66 waterproof rating withstands rain, splashing, and outdoor exposure for reliable keychain carry. The single-button layout provides one-touch activation without fumbling for the correct button.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Transmission Indicator:\u003c\/strong\u003e Built-in LED lights only when the button is pressed, confirming active signal transmission and serving as a visual check that the remote is functioning and the battery has charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFCC and IC Certified:\u003c\/strong\u003e Certified for authorized wireless transmission in the United States (FCC) and Canada (IC). Operates on a single CR2032 battery (replacement model X-930-096) for extended life with easy field replacement.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706793496760,"sku":"SK-919T1-GBQ","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/2_SK-9x9T1-xxQ_600x600_220601.png?v=1741583785"},{"product_id":"seco-larm-sk-919t3-gnq-gate-remote-control","title":"Seco-Larm SK-919T3-GNQ Gate Remote Control - 3-Button 315MHz RF Transmitter, IP66, 7 Channels","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003e3-Button 315MHz RF Gate Remote Control with 7 Channels, IP66 Waterproof Housing, 68 Billion Code Combinations, Anti-Scan Protection, and Keychain Pendant Design for Seco-Larm Gate, Garage, and Access Control Systems\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e SK-919T3-GNQ is a 3-button 315MHz RF gate remote control with 7 channels, an IP66 waterproof housing, and over 68 billion code combinations for secure wireless control of gates, garage doors, and access control systems. The SK-919T3-GNQ is pre-coded and compatible with all Seco-Larm 315MHz RF receivers, with anti-scan protection that prevents unauthorized devices from capturing the transmission code.\u003c\/p\u003e\n\u003cp\u003eThe three-button, seven-channel configuration allows independent control of multiple devices or functions from a single remote, such as opening a gate, activating a garage door, and arming a security system. The compact pendant design measures 1-1\/4 x 2-3\/16 x 5\/16 inches and attaches to keychains, lanyards, and belt clips. The SK-919T3-GNQ operates on a CR2032 battery (replacement model X-930-096) and is FCC and IC certified for authorized wireless transmission.\u003c\/p\u003e\n\u003ch3\u003eWhere the SK-919T3-GNQ Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGate and garage door systems requiring multi-function control\u003c\/strong\u003e where the three buttons provide independent open, close, and stop commands or control separate gate operators, the 315MHz RF signal delivers reliable range to Seco-Larm receivers, and the IP66 waterproof housing withstands daily outdoor exposure on keychains and in vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-device access control and security installations\u003c\/strong\u003e where the 7-channel configuration controls gates, doors, garage openers, and alarm systems from a single remote, 68 billion code combinations with anti-scan protection prevent code capture and unauthorized access, and the compact pendant design provides convenient carry for staff, residents, and property managers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement or expansion remotes for Seco-Larm 315MHz systems\u003c\/strong\u003e where pre-coded operation enables immediate pairing with any compatible Seco-Larm 315MHz receiver without programming tools, the FCC and IC certified frequency matches existing installations across the United States and Canada, and the CR2032 battery provides extended operation with easy field replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SK-919T3-GNQ Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 Buttons with 7 Channels:\u003c\/strong\u003e Three-button design provides 7 independent channel combinations for controlling multiple devices and functions from a single remote. Each button or button combination triggers a separate receiver output for flexible multi-device operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e315MHz RF with 68 Billion Codes:\u003c\/strong\u003e Pre-coded 315MHz transmitter provides over 68 billion code combinations for secure wireless communication with all Seco-Larm 315MHz receivers. Anti-scan protection prevents unauthorized devices from intercepting and replaying the transmission code.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Waterproof Pendant Design:\u003c\/strong\u003e Compact 1-1\/4 x 2-3\/16 x 5\/16 inch pendant housing with IP66 waterproof rating withstands rain, splashing, and outdoor exposure for reliable daily carry on keychains, lanyards, and belt clips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFCC and IC Certified:\u003c\/strong\u003e Certified for authorized wireless transmission in the United States (FCC) and Canada (IC). LED transmission indicator confirms active signal output when buttons are pressed. Operates on a single CR2032 battery (replacement model X-930-096).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706793529528,"sku":"SK-919T3-GNQ","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/2_SK-9x9T3-xxQ_600x600_220601.png?v=1741583486"},{"product_id":"seco-larm-ss-032q-rd-red-push-button","title":"Seco-Larm SS-032Q\/RD Red Momentary Push Button - SPST Normally Open, 1A 12VDC, 1\/2-Inch Panel Mount","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eRed Momentary SPST Push Button with Normally Open Contact, 1A at 12VDC Rating, and 1\/2-Inch Panel Mount for Access Control and Low-Voltage Switching\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e SS-032Q\/RD is a compact red momentary push button with a single-pole single-throw normally open contact rated for 1A at 12VDC. The SS-032Q\/RD mounts in a standard 1\/2-inch (13mm) panel hole and provides a clean, reliable switching solution for push-to-exit stations, alarm trigger points, and auxiliary control circuits in low-voltage access control and security installations.\u003c\/p\u003e\n\u003cp\u003eThe SS-032Q\/RD uses a momentary contact design that returns to its normally open state when released, making it suitable for applications where a brief signal triggers a door release, alarm notification, or automation event. The compact form factor fits inside control panels, enclosures, and custom mounting plates where space is limited and a visible red indicator is needed to identify the button function.\u003c\/p\u003e\n\u003ch3\u003eWhere the SS-032Q\/RD Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-to-exit and request-to-exit stations\u003c\/strong\u003e where the momentary normally open contact sends a brief signal to an access control panel or electric lock to trigger a door release, the red button cap provides a visible indicator for emergency or exit functions, and the 1\/2-inch panel mount fits standard enclosure knockouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm and alert trigger points\u003c\/strong\u003e where the SPST normally open switch activates a siren, notification relay, or monitoring system input when pressed, the 1A at 12VDC rating handles direct relay coil loads, and the momentary action resets automatically without manual intervention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom control panels and low-voltage switching\u003c\/strong\u003e where the compact push button fits into tight enclosure layouts alongside other controls, the red cap identifies the button for specific functions like stop or alert, and the simple two-wire connection integrates with any normally open input on a control board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SS-032Q\/RD Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMomentary SPST Normally Open Contact:\u003c\/strong\u003e Single-pole single-throw switch with normally open contacts returns to its default state when released. Momentary action provides a clean, repeatable signal pulse for door releases, alarm triggers, and automation inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1A at 12VDC Rating:\u003c\/strong\u003e Rated for 1 amp at 12 volts DC to handle direct relay coil loads and low-voltage control circuits. The contact rating supports typical access control and security system voltage requirements without an intermediate relay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/2-Inch Panel Mount:\u003c\/strong\u003e Mounts in a standard 1\/2-inch (13mm) panel hole for easy installation in control enclosures, custom plates, and equipment housings. The compact form factor fits tight layouts where space is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Button Cap:\u003c\/strong\u003e Red color provides a visible indicator for emergency, stop, or alert functions. The distinctive color helps users quickly identify the button purpose in multi-button control panel layouts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706794152120,"sku":"SS-032Q\/RD","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/s1.webp?v=1741365039"},{"product_id":"seco-larm-ss-075c-peq-push-to-exit-button","title":"Seco-Larm SS-075C-PEQ Push to Exit Button - Selectable NO\/NC, 12-24VDC, Concealed Terminals","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eLow-Profile Push to Exit Button with Selectable Normally Open or Normally Closed Momentary Contact, 1A at 12VDC Rating, Concealed Screw Terminals, and Interchangeable Emergency and Exit Labels for Indoor Access Control Installations\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e SS-075C-PEQ is a low-profile push to exit button with a selectable normally open or normally closed momentary contact rated at 1A at 12VDC. The SS-075C-PEQ operates on 12 to 24VDC, features concealed screw terminals for a clean installation appearance, and includes three interchangeable adhesive labels: Emergency, Push to Exit, and Presione Para Salir.\u003c\/p\u003e\n\u003cp\u003eThe compact 3 x 15\/16 x 5\/8 inch off-white housing blends with standard interior decor and fits tight mounting locations where a discreet exit or emergency button is needed. The selectable NO\/NC contact configuration adapts to both normally open and normally closed access control panel inputs without requiring a separate button model for each wiring scheme.\u003c\/p\u003e\n\u003ch3\u003eWhere the SS-075C-PEQ Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequest-to-exit stations at access-controlled doors\u003c\/strong\u003e where the momentary contact sends a brief signal to an access control panel or electric lock to trigger a door release, the low-profile off-white housing blends with interior walls and door frames, and the concealed screw terminals provide a clean finished appearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmergency exit and alert trigger points\u003c\/strong\u003e where the included Emergency label identifies the button for panic or duress activation, the selectable NO\/NC contact connects to any alarm panel or monitoring system input, and the 1A at 12VDC rating handles direct relay coil loads without an intermediate relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBilingual facilities requiring dual-language labeling\u003c\/strong\u003e where the included Push to Exit and Presione Para Salir adhesive labels cover English and Spanish identification requirements, the compact form factor fits alongside other controls in tight enclosures, and the 12 to 24VDC operating range connects to standard access control panel power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SS-075C-PEQ Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable NO\/NC Momentary Contact:\u003c\/strong\u003e Field-selectable normally open or normally closed contact configuration adapts to any access control panel input without stocking separate button models. The momentary action returns to its default state when released for clean, repeatable signal pulses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1A at 12VDC with 12-24VDC Operation:\u003c\/strong\u003e Contact rated at 1 amp at 12 volts DC handles direct relay coil loads and low-voltage control circuits. The 12 to 24VDC operating voltage range connects to standard access control and security system power supplies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcealed Screw Terminals:\u003c\/strong\u003e Hidden screw terminal connections provide a clean, tamper-resistant installation appearance. The low-profile 3 x 15\/16 x 5\/8 inch off-white housing mounts flush against interior walls for discreet placement at exit points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable Labels in English and Spanish:\u003c\/strong\u003e Three included adhesive labels cover Emergency, Push to Exit, and Presione Para Salir identification. Swap labels to match the application without ordering separate button models for emergency and exit functions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706794184888,"sku":"SS-075C-PEQ","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/seco2_fae96277-5193-42bb-bd32-bf8b1a84cba9.webp?v=1736950328"},{"product_id":"ubiquiti-unifi-access-g2-starter-kit","title":"Ubiquiti UniFi Access G2 Starter Kit - Single-Door Access Control with G2 Reader and Hub (UA-G2-SK)","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplete Single-Door Access Control Kit with G2 Reader, Hub, and Power Adapter\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/ubiquiti\"\u003eUbiquiti\u003c\/a\u003e UniFi Access G2 Starter Kit (UA-G2-SK) is a complete, single-door access control package that includes a G2 Reader, G2 Hub, and power adapter. It provides everything needed to deploy NFC-based secure entry on one door without sourcing components individually or requiring separate PoE infrastructure.\u003c\/p\u003e\n\u003cp\u003eThe kit integrates with the UniFi Access platform for credential management, access scheduling, and event logging. The G2 Reader mounts at the door for NFC card or phone-based authentication, while the G2 Hub connects to the lock hardware and communicates with the UniFi Access controller. No subscription required. For facilities expanding beyond one door, additional readers and hubs can be added to the same UniFi Access deployment.\u003c\/p\u003e\n\u003ch3\u003eWhere the G2 Starter Kit Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall offices and single-door deployments\u003c\/strong\u003e that need modern access control on one entry point with NFC credentials and audit logging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirst UniFi Access deployment\u003c\/strong\u003e where the starter kit provides all required components to get one door operational before expanding to additional doors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote doors and satellite locations\u003c\/strong\u003e in larger organizations that need a standalone single-door access control system managed through the same UniFi Access platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the G2 Starter Kit Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete single-door kit:\u003c\/strong\u003e G2 Reader + G2 Hub + power adapter. Everything for one door in one box. No separate PoE injector needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNFC authentication:\u003c\/strong\u003e Supports NFC cards and mobile phone credentials for contactless entry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniFi Access integration:\u003c\/strong\u003e Full software platform for credential management, access schedules, door groups, and event history. No subscription fees.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-play installation:\u003c\/strong\u003e Standard wall mount with included hardware. Reader connects to Hub, Hub connects to door lock and network.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ubiquiti Inc.","offers":[{"title":"Default Title","offer_id":50706794610872,"sku":"UA-G2-SK","price":306.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/ubiq1_a9adfdba-cf94-45f7-a28a-59d7ce38260e.webp?v=1736950924"},{"product_id":"ubiquiti-unifi-access-pocket-keyfob","title":"Ubiquiti UniFi Access Pocket Keyfob (10-Pack) - MIFARE DESFire EV3 NFC Fobs for UniFi Access (UA-Pocket)","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003e10-Pack of MIFARE DESFire EV3 NFC Keyfobs for Secure UniFi Access Door Control\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/ubiquiti\"\u003eUbiquiti\u003c\/a\u003e UniFi Access Pocket Keyfob (UA-Pocket) is a 10-pack of compact NFC keyfobs built on MIFARE DESFire EV3 4K technology for use with UniFi Access readers, intercoms, and hubs. Each fob uses Ubiquiti's proprietary security protocol to prevent cloning and unauthorized duplication. Tap to unlock at any UniFi Access reader, intercom, or hub within NFC range. Credentials are managed centrally through the UniFi Access platform alongside cards, mobile credentials, and PIN codes.\u003c\/p\u003e\n\u003cp\u003eUbiquiti offers access credentials in two form factors: the UA-Card (credit-card-sized NFC badge for lanyards or wallets) and the UA-Pocket keyfob (compact fob for keyrings). Both use the same MIFARE DESFire EV3 4K chip and security protocol, so they work identically at any UniFi Access reader. The keyfob form factor is preferred for employees who carry keys rather than badges, and for environments where a lanyard-mounted card is impractical or a safety hazard.\u003c\/p\u003e\n\u003ch3\u003eWhere the Pocket Keyfob Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmployee access for warehouses and industrial sites\u003c\/strong\u003e where workers carry keys and a keyring-mounted fob is more practical than a lanyard or wallet card\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-tenant buildings\u003c\/strong\u003e where residents receive a compact fob for main entry, elevator, and amenity access through UniFi Access readers at each controlled door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisitor or contractor credentials\u003c\/strong\u003e where temporary fobs are issued, tracked, and deactivated centrally through UniFi Access when the visit or contract ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the Pocket Keyfob Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIFARE DESFire EV3 4K NFC chip:\u003c\/strong\u003e Industry-standard secure element with 4KB storage. Anti-cloning protection through Ubiquiti's proprietary encryption prevents unauthorized credential duplication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact keyring form factor:\u003c\/strong\u003e Small enough to carry alongside house and car keys without bulk. Durable plastic housing rated for daily pocket and keyring wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks with all UniFi Access readers:\u003c\/strong\u003e Compatible with UA-Reader Lite, UA-Reader Pro, UA-Intercom, UA-Hub, and any NFC-equipped UniFi Access device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentrally managed credentials:\u003c\/strong\u003e Each fob is enrolled, assigned to a user, and revocable through UniFi Access. Lost fobs are deactivated instantly without physical retrieval.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-pack packaging:\u003c\/strong\u003e Bulk quantity for provisioning teams, new tenant onboarding, or maintaining spare inventory for replacements.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ubiquiti Inc.","offers":[{"title":"Default Title","offer_id":50706794873016,"sku":"UA-Pocket","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/ub1.webp?v=1744825439"},{"product_id":"seco-larm-sd-7202gc-ptq-push-to-exit-button-with-timer","title":"Seco-Larm SD-7202GC-PTQ Push to Exit Button with Timer - Illuminated, Stainless Steel, 1-180 Seconds","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eIlluminated Push to Exit Button with Adjustable 1-180 Second Timer, NO\/NC Contacts, 3A at 24VDC Rating, Stainless Steel Single-Gang Faceplate, and Buzzer Output for Access Control Door Release\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/seco-larm\"\u003eSeco-Larm\u003c\/a\u003e SD-7202GC-PTQ is an illuminated push to exit button with an adjustable timer from 1 to 180 seconds and selectable NO\/NC contacts rated at 3A at 24VDC. The SD-7202GC-PTQ operates on 12-24VDC, features a 2-inch green illuminated square pushbutton on a brushed stainless steel single-gang faceplate, and includes a buzzer output for audible activation confirmation.\u003c\/p\u003e\n\u003cp\u003eThe built-in adjustable timer holds the output for 1 to 180 seconds after activation, allowing the connected maglock or electric strike to remain released long enough for door passage without requiring continuous button pressure. The five color-coded 12-inch wire leads with spade lugs simplify connection to access control panels, electric locks, and alarm systems.\u003c\/p\u003e\n\u003ch3\u003eWhere the SD-7202GC-PTQ Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaglock and electric strike door release stations\u003c\/strong\u003e where the adjustable 1-180 second timer holds the lock release after a single button press, the NO\/NC contacts connect to any access control panel input, and the stainless steel single-gang faceplate mounts on standard electrical boxes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial egress points requiring visual and audible confirmation\u003c\/strong\u003e where the green illuminated 2-inch pushbutton provides a visible exit indicator, the buzzer output confirms activation for the person exiting, and the 3A at 24VDC contact rating handles direct maglock and strike loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchools, offices, and retail locations with timed door release\u003c\/strong\u003e where the timer prevents the door from remaining unlocked after the release period expires, the 12-24VDC operating range connects to standard access control power supplies, and the brushed stainless steel finish withstands daily use in high-traffic areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the SD-7202GC-PTQ Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable 1-180 Second Timer:\u003c\/strong\u003e Built-in timer adjusts from 1 to 180 seconds to hold the output after a single button press. The timed release keeps the connected lock disengaged for the set duration, then automatically re-engages without manual intervention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNO\/NC Contacts at 3A\/24VDC:\u003c\/strong\u003e Selectable normally open or normally closed contacts rated at 3 amps at 24VDC handle direct maglock, electric strike, and relay coil loads. The dual-contact configuration adapts to any access control panel input wiring scheme.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreen Illuminated 2-Inch Pushbutton:\u003c\/strong\u003e The 2-inch green illuminated square button provides a visible exit indicator and easy target for users. The 12V 1.2W bulb provides 15,000 hours of rated life for reliable long-term illumination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Single-Gang Faceplate:\u003c\/strong\u003e Brushed stainless steel single-gang faceplate mounts on standard electrical boxes and resists scratching, corrosion, and daily wear. Five color-coded 12-inch wire leads with spade lugs simplify wiring connections.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO-LARM","offers":[{"title":"Default Title","offer_id":50706797494456,"sku":"sd-7202gc-ptq","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/sec1_e95596ee-420e-430f-b2c8-f17d813a3ed9.jpg?v=1736959594"},{"product_id":"rosslare-printable-proximity-access-control-card-25-pack","title":"Rosslare Access Control Card - 125 kHz Printable Proximity Card, 26-Bit Wiegand CR80, Pack of 25 (AT-ERS-26A-3001)","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eRosslare Printable Proximity Access Control Card, 125 kHz, 26-Bit Wiegand, 25-Pack\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/rosslareaccesscontrol\"\u003eRosslare\u003c\/a\u003e AT-ERS-26A-3001 is a printable 125 kHz proximity access control card in standard ISO CR80 size, sold in packs of 25 for bulk credential issuance. An access control card is a contactless ID badge that stores a unique number: the cardholder taps it to a 125 kHz reader at a door, the reader sends the number to the controller, and the controller unlocks the door if the number is authorized.\u003c\/p\u003e\n\u003cp\u003eWhat separates this card from a standard prox tag is that the entire face is a printable PVC surface. Dye-sublimation and thermal card printers can print photos, names, logos, and barcodes directly onto the card, turning a proximity credential into a full employee photo ID badge in one print pass. Horizontal and vertical slot punch guides are built into the card edge, so a standard badge-clip punch cuts it for a lanyard or reel without damaging the antenna coil inside.\u003c\/p\u003e\n\u003cp\u003eThese cards use the standard 26-bit Wiegand format, which is the format shipped by the overwhelming majority of access control systems worldwide, including systems from Rosslare, HID, ZKTeco, and most generic 125 kHz readers. As part of the broader \u003ca href=\"\/collections\/security-surveillance\"\u003esecurity and surveillance\u003c\/a\u003e product line at Island Electrical Supply, this 25-pack is a stock item for integrators and facility managers issuing credentials to new employees, tenants, or contractors.\u003c\/p\u003e\n\u003ch3\u003eWho This Card Pack Is For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHR and facilities teams at offices, campuses, or warehouses\u003c\/strong\u003e rolling out photo ID badges that double as door access credentials for employees, contractors, or visitors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecurity integrators and card printer operators\u003c\/strong\u003e stocking blank printable prox cards to produce branded, photo-bearing credentials on demand for commercial clients\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProperty managers, schools, and gyms\u003c\/strong\u003e issuing access credentials in bulk where a visible ID badge matters as much as the underlying access control function\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know Before You Buy\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e26-bit Wiegand standard:\u003c\/strong\u003e Works with the majority of 125 kHz access control systems shipped in the last 25 years. Compatible with Rosslare, HID, ZKTeco, and generic 26-bit readers, so enrolling these cards into an existing controller is usually a matter of reading one at the panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrintable on both sides:\u003c\/strong\u003e The gloss white PVC surface accepts dye-sublimation and thermal ribbon prints from standard card printers (Fargo, Zebra, Magicard, Evolis, and similar). Print a logo, photo, name, department, or barcode without an overlay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO CR80 credit-card size:\u003c\/strong\u003e 85.6 x 54.0 x 0.8 mm, the standard badge size. Fits every commercial badge holder, lanyard clip, retractable reel, and wallet slot on the market.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlot punch ready:\u003c\/strong\u003e Horizontal and vertical punch guides are marked on the card edge. Use a standard badge-punch tool to cut for a lanyard or clip without severing the internal antenna coil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable PVC build:\u003c\/strong\u003e Rated -25°C to 50°C operating range and 0-90% non-condensing humidity. Glossy finish resists scuffs and daily wallet or pocket wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuild and Compatibility\u003c\/h3\u003e\n\u003cp\u003eGlossy white PVC card in standard ISO CR80 size (85.6 x 54.0 x 0.8 mm, 5.7 g \/ 0.2 oz per card). 125 kHz passive RFID with 26-bit Wiegand encoding, factory-programmed with a unique ID per card. Read range 20 to 60 mm depending on reader antenna geometry. Contactless passive operation, no battery required. Printable on both sides via dye-sublimation or thermal ribbon card printers. Horizontal and vertical slot punch guides included. Operating temperature -25°C to 50°C (-13°F to 122°F), humidity 0-90% non-condensing. Ships as a 25-piece pack.\u003c\/p\u003e","brand":"Rosslare","offers":[{"title":"Default Title","offer_id":50706797723832,"sku":"AT-ERS-26A-3001","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/ubiq1_7dcb3832-b91b-41bf-950d-c7c2d87d4437.webp?v=1741289775"},{"product_id":"ubiquiti-unifi-access-g3-reader-pro","title":"Ubiquiti UniFi Access G3 Reader Pro - NFC, Touch Display, Intercom, IP55, PoE, NDAA Compliant (UA-G3-Pro-B)","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eMulti-Factor Access Reader with Built-In Intercom, 4.7-Inch Touchscreen, and Outdoor-Rated Housing\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/ubiquiti\"\u003eUbiquiti\u003c\/a\u003e UniFi Access G3 Reader Pro (UA-G3-Pro-B) is a third-generation NFC reader, PIN pad, and two-way intercom in a single wall-mounted unit. The 4.7-inch capacitive touchscreen handles credential presentation, PIN entry, and video intercom calls, while the integrated camera, microphone, and speaker let visitors ring a doorbell and communicate with staff before entry is granted.\u003c\/p\u003e\n\u003cp\u003eThe G3 Reader Pro supports NFC cards, keyfobs, PINs, Apple Wallet, Google Wallet, and mobile unlock through the UniFi Access app. UL 294 Level I certification across all performance categories means it meets the hardware security standard required for commercial access control installations. IP55 weatherproofing and NDAA compliance make it deployable at exterior doors, gates, and government facilities where both durability and supply chain compliance matter.\u003c\/p\u003e\n\u003ch3\u003eWhere the G3 Reader Pro Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial office entries and lobbies\u003c\/strong\u003e where visitors need intercom access to reach reception, employees badge in with NFC or phone, and the system must meet UL 294 certification for insurance or compliance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-tenant buildings and gated communities\u003c\/strong\u003e where each unit needs a doorbell with video intercom and the property manager controls access centrally through UniFi Access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment and NDAA-compliant facilities\u003c\/strong\u003e requiring certified access hardware with no restricted-country components, combined with multi-factor authentication (NFC + PIN) at secure entry points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the G3 Reader Pro Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-factor NFC + PIN + mobile:\u003c\/strong\u003e Supports ISO\/IEC 14443A\/B, 15693, 18092, MIFARE Classic, DESFire, Sony FeliCa, NFC Forum T1-T5, and Apple\/Google Wallet. Combine any credential type with PIN entry for two-factor authentication at high-security doors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-way intercom and doorbell:\u003c\/strong\u003e Integrated camera, microphone, and speaker. Visitors press the doorbell, staff see video and speak through the UniFi Access app or a connected display, then grant or deny entry remotely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.7-inch capacitive touchscreen:\u003c\/strong\u003e 1280 x 286 px portrait display at 480 nits brightness. Shows credential prompts, PIN entry, intercom status, and custom branding. Readable in direct sunlight at building entrances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP55 weatherproof, UL 294 certified:\u003c\/strong\u003e Rated for outdoor mounting at building entries exposed to rain and dust. UL 294 Level I certification validates performance across endurance, attack resistance, and environmental exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE powered, 6W max:\u003c\/strong\u003e Single Ethernet cable provides data and power from any PoE switch or injector. GbE RJ45 plus BLE 4.2 for device connectivity and mobile credential transfer.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ubiquiti Inc.","offers":[{"title":"Default Title","offer_id":51468539658424,"sku":"UA-G3-Pro-B","price":400.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/ScreenShot2025-06-25at7.05.13AM.png?v=1750860319"},{"product_id":"ubiquiti-reader-junction-box","title":"Ubiquiti UniFi Access Reader Junction Box - Wall Mount Enclosure with Conduit Support for Access Readers and Intercoms (UACC-Reader-JB-B)","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eSurface-Mount Junction Box for UniFi Access Readers and Intercom Viewers with 3\/4-Inch Conduit Entry and VESA Compatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/ubiquiti\"\u003eUbiquiti\u003c\/a\u003e UniFi Access Reader Junction Box (UACC-Reader-JB-B) is a surface-mount enclosure that provides clean cable management and conduit routing for UniFi Access Reader and Intercom Viewer installations. It mounts to flat wall surfaces and accepts 3\/4-inch conduit connections, allowing structured cable runs to terminate behind the reader rather than exiting directly from the wall. VESA mounting compatibility adds flexibility for installations where the reader needs to attach to an existing VESA-equipped surface or bracket.\u003c\/p\u003e\n\u003cp\u003eAt 145 x 88 x 50 mm and 220 grams, the junction box adds minimal depth behind the mounted device while providing enough internal volume for cable slack, connectors, and conduit transitions. The polycarbonate construction with sponge and rubber gasket material protects cable entry points and provides a sealed mounting surface. Black finish matches the UniFi Access reader lineup for a consistent installation appearance.\u003c\/p\u003e\n\u003ch3\u003eWhere the Reader Junction Box Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial building entries with conduit requirements\u003c\/strong\u003e where local electrical code mandates structured conduit runs to wall-mounted devices, and the junction box provides the transition point between conduit and reader cable without exposed wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcrete and masonry walls\u003c\/strong\u003e where running cable inside the wall is impractical, and a surface-mount box with conduit entry provides a code-compliant and aesthetically clean cable path to the access reader\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-reader deployments with VESA-mounted displays\u003c\/strong\u003e where the Intercom Viewer or Reader Pro mounts to a VESA arm or bracket, and the junction box provides the cable connection point behind the mounting interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the Reader Junction Box Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4-inch conduit compatibility:\u003c\/strong\u003e Accepts standard 3\/4-inch conduit connections for structured cable entry. Routes Ethernet and power cabling from conduit directly to the reader without exposed cable runs on the wall surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat-surface and VESA mounting:\u003c\/strong\u003e Mounts directly to drywall, concrete, or masonry with included hardware. VESA-compatible mounting pattern supports installations where the reader attaches to a bracket or arm rather than a flat wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed cable management:\u003c\/strong\u003e Polycarbonate shell with sponge and rubber gasket material protects cable entry points from dust and moisture. Provides internal volume for cable slack and connector transitions behind the mounted reader.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal UniFi Access compatibility:\u003c\/strong\u003e Designed for UniFi Access Readers (G2, G3, Lite) and Intercom Viewers. Maintains the clean mounting profile of the reader while adding structured cable support behind the unit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ubiquiti Inc.","offers":[{"title":"Default Title","offer_id":51492320051384,"sku":"UACC-P-R-JB-B","price":37.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/uacc-reader-pro-jb-2.png?v=1751544454"},{"product_id":"ubiquiti-eah-8-enterprise-access-hub-8-door-controller","title":"Ubiquiti EAH-8 Enterprise Access Hub - 8-Door UniFi Access Controller with PoE+, Battery Backup, UL 294 Level I","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003e8-Door Access Controller with PoE for Readers, Battery Backup, and UL 294 Level I Certification\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/ubiquiti\"\u003eUbiquiti\u003c\/a\u003e Enterprise Access Hub (EAH-8) is UniFi's 8-door access control hub, consolidating what would normally take four or more single-door UA-Hub units into one rack-sized wall-mount chassis. Wire up to eight doors to a single EAH-8 and manage every reader, lock, request-to-exit, and door position sensor from the UniFi Access app. Eight built-in PoE ports power readers directly without separate power supplies at each door.\u003c\/p\u003e\n\u003cp\u003eThe EAH-8 is UL 294 Level I certified across destructive attack, line security, endurance, and standby power. Built-in 32-48V lead-acid battery backup keeps doors locked or unlocked per policy during power failures. As part of the \u003ca href=\"\/collections\/unifi-enterprise\"\u003eUniFi Enterprise\u003c\/a\u003e family, it is managed from the same console as every other UniFi Access, Network, Protect, and Talk device.\u003c\/p\u003e\n\u003ch3\u003eWhere the EAH-8 Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial office buildings and multi-tenant facilities\u003c\/strong\u003e controlling 5-8 doors on a single floor or wing where multiple single-door hubs would mean more cabling, more power drops, and more devices to maintain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchools, hospitals, and government facilities\u003c\/strong\u003e that need UL 294 Level I certified access control with battery backup for uninterrupted door security during power events\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecurity integrators consolidating off legacy panels\u003c\/strong\u003e onto UniFi Access to eliminate annual software licenses while keeping real enterprise features like battery backup and multi-door control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the EAH-8 Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight doors, one hub:\u003c\/strong\u003e Eight request-to-exit inputs, eight door position inputs, eight lock terminals (12V or dry), and four auxiliary terminals for chimes, sirens, or door openers. One emergency input for panic or evacuation triggers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE for readers built in:\u003c\/strong\u003e Eight PoE ports deliver power and data to UniFi readers (G2, G3, Ultra, Intercom) without separate power supplies at each door. 60W total PoE budget, 30W max per port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery backup:\u003c\/strong\u003e 32-48V DC lead-acid battery input keeps the hub running through an AC outage. Doors maintain their locked\/unlocked policy state rather than failing open or stranding occupants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL 294 Level I certified:\u003c\/strong\u003e Certified for destructive attack, line security, endurance, and standby power. Specifiable for commercial and government facilities where consumer-grade gear is not acceptable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManaged through UniFi Access:\u003c\/strong\u003e Enrollment, schedules, credentials, audit logs, and real-time event monitoring run through the same UniFi console as the rest of your deployment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEAH-8 vs UA-Hub: Which Do You Need?\u003c\/h3\u003e\n\u003cp\u003eThe UA-Hub (single-door) and EAH-8 (eight-door) both connect readers and locks to UniFi Access, but they solve different scale problems. The UA-Hub powers one reader and one lock per unit, mounts behind the door frame, and works for single-door deployments or small offices with 1-4 doors. The EAH-8 consolidates eight doors into one wall-mount enclosure with a shared PoE budget, battery backup, and UL 294 certification. For buildings with 5+ doors per floor, the EAH-8 reduces total device count, simplifies wiring, and adds the battery backup and certification that commercial deployments require.\u003c\/p\u003e","brand":"Ubiquiti Inc.","offers":[{"title":"Default Title","offer_id":51606509420728,"sku":"EAH-8","price":1066.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/eah-8-1.png?v=1754061791"},{"product_id":"akuvox-r20a-video-door-phone-sip-intercom","title":"Akuvox R20A Video Door Phone - SIP Intercom, 2MP 1080p Camera, RFID Access, PoE, IP65","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eSIP Video Door Phone with 1080p Camera, Dual-Frequency RFID Card Access, and Two-Way Audio for Commercial and Multi-Tenant Entry Points\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Akuvox R20A is a SIP \u003ca href=\"\/collections\/security-cameras\"\u003evideo door phone\u003c\/a\u003e that combines a 2MP 1080p camera with RFID card access and two-way audio in a slim aluminum housing built for outdoor entry points. The 110-degree horizontal and 58-degree vertical field of view covers the full doorway area, dual-frequency RFID (13.56MHz NFC and 125kHz) reads EM, Mifare, and DesFire cards for up to 5,000 users with 25,000 card credentials, and SIP v1\/v2 compatibility connects the R20A to any standards-based phone system or intercom platform. Power comes from PoE (802.3af) or 12V DC, and the IP65-rated enclosure handles rain, dust, and temperatures from -30 to 60 degrees Celsius.\u003c\/p\u003e\n\u003cp\u003eThe R20A is part of the \u003ca href=\"\/collections\/akuvox\"\u003eAkuvox\u003c\/a\u003e commercial intercom lineup and sits at the single-button entry level for buildings that need video verification and card access at one door without the complexity of a multi-tenant lobby panel. Two relay outputs control electric strikes and magnetic locks, Wiegand and RS485 interfaces integrate with existing access control systems, and ONVIF compatibility feeds the H.264 video stream to network video recorders and VMS platforms. The Linux-based firmware is managed through a web interface for remote configuration of SIP accounts, RFID credentials, and relay behavior.\u003c\/p\u003e\n\u003ch3\u003eWhere the R20A Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffice buildings and commercial facility entry doors\u003c\/strong\u003e where the SIP protocol connects to the existing phone system for visitor-to-tenant calling, the 2MP 1080p camera provides video verification before granting access, and dual-frequency RFID reads employee badges without requiring a separate card reader and controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarehouse loading docks, gated parking areas, and industrial access points\u003c\/strong\u003e where the IP65 aluminum housing withstands outdoor exposure from -30 to 60 degrees Celsius, two relay outputs control gate operators and electric locks, and PoE power runs video, audio, and access control over a single Ethernet cable up to 100 meters from the nearest switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-tenant residential buildings and mixed-use properties\u003c\/strong\u003e where SIP intercom calling lets visitors reach any tenant through the building phone system, the 5,000-user and 25,000-card capacity handles large credential databases, and Wiegand and RS485 outputs integrate the R20A into existing access control platforms for centralized management across multiple entry points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the R20A Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2MP 1080p Camera with 110-Degree View:\u003c\/strong\u003e 2-megapixel camera at 1080p and 30fps with 110-degree horizontal and 58-degree vertical field of view for full doorway coverage. H.264 video encoding with ONVIF compatibility for NVR and VMS integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Frequency RFID Card Access:\u003c\/strong\u003e 13.56MHz NFC and 125kHz RFID reader supports EM, Mifare, and DesFire card formats. 5,000-user capacity with up to 25,000 stored card credentials for commercial and multi-tenant deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSIP Intercom with Two-Way Audio:\u003c\/strong\u003e SIP v1\/v2 protocol connects to any standards-based IP phone system or intercom platform. Two-way audio with noise cancellation for clear visitor-to-tenant communication. Web-based management for remote configuration of SIP accounts and call routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 Outdoor-Rated Construction:\u003c\/strong\u003e Aluminum alloy housing rated IP65 for rain, dust, and temperature extremes from -30 to 60 degrees Celsius. Slim 145 x 85 x 22mm profile for flush-mount or surface-mount installation at entry doors and gates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess Control Integration:\u003c\/strong\u003e Two relay outputs for electric strikes and magnetic locks. Wiegand and RS485 interfaces for integration with third-party access control panels. PoE (802.3af) or 12V DC power with Linux-based firmware for centralized web management.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Akuvox","offers":[{"title":"Default Title","offer_id":51823379284152,"sku":"R20A","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/R20A_28775da5-a310-4600-a94a-fc2053000089.webp?v=1758815694"},{"product_id":"rosslare-access-control-key-fob-em4102-25-pack","title":"Rosslare Access Control Key Fob - 125 kHz EM4102 Proximity Fob, Pack of 25 (AT-ERK-26A7TB0)","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eRosslare Access Control Key Fob - 125 kHz Proximity Fob, 25-Pack\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/rosslareaccesscontrol\"\u003eRosslare\u003c\/a\u003e AT-ERK-26A7TB0 is a 125 kHz proximity key fob for access control systems, sold in packs of 25 to outfit an entire office, building, or membership roster from a single order. A fob is a contactless credential that holds a unique ID: the user taps it to a 125 kHz reader at a door, the reader sends the ID to the controller, and the controller unlocks the door if the ID is authorized.\u003c\/p\u003e\n\u003cp\u003eInside each fob is an EM4102 (or GK4001) read-only chip paired with a copper coil antenna, which is the standard 125 kHz proximity technology used in most access control deployments and by readers from Rosslare, HID, ZKTeco, and other major brands. These fobs directly replace the older Rosslare AT-R271BL, so existing 125 kHz systems can roll them in without reprogramming the reader.\u003c\/p\u003e\n\u003cp\u003eEach fob in this pack is factory-encoded with a unique ID, ready to enroll in the controller. Contactless and passive, they never need batteries and draw power from the reader field when held within 20 cm of the antenna. As part of the broader \u003ca href=\"\/collections\/security-surveillance\"\u003esecurity and surveillance\u003c\/a\u003e product line at Island Electrical Supply, this pack is a stock item for integrators provisioning new tenants or replacing lost credentials.\u003c\/p\u003e\n\u003ch3\u003eWho This Key Fob Pack Is For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProperty managers and HOA administrators\u003c\/strong\u003e issuing or replacing credentials for residents, amenity access, gym entry, or parking gates on a 125 kHz reader system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecurity integrators and locksmiths\u003c\/strong\u003e specifying credentials for commercial tenant fit-outs, small office builds, or migration off legacy systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFacility managers at offices, schools, gyms, and warehouses\u003c\/strong\u003e who need a cost-effective 25-pack to enroll new employees, members, or contractors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know Before You Buy\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 125 kHz EM4102:\u003c\/strong\u003e Works with any reader that supports EM4102 or GK4001 at 100-150 kHz. That covers the majority of Rosslare, ZKTeco, HID ProxPoint Plus, and generic 125 kHz prox readers in the field.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in replacement for AT-R271BL:\u003c\/strong\u003e These fobs use the same format and read protocol as Rosslare's previous generation, so existing controllers and readers accept them without firmware changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContactless and batteryless:\u003c\/strong\u003e Passive RF technology means no batteries to replace and no charging. Fobs last for the life of the credential as long as the PVC shell stays intact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRead range up to 20 cm:\u003c\/strong\u003e Actual distance depends on the reader's antenna and orientation. Most door readers get a reliable tap at 2 to 10 cm, which is what access control deployments typically target to avoid accidental reads from pocket fobs walking past.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough PVC build:\u003c\/strong\u003e Rated -20°C to 50°C (-4°F to 122°F) operating range and 90% non-condensing humidity. The sealed shell handles pockets, keychains, and daily office wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuild and Compatibility\u003c\/h3\u003e\n\u003cp\u003eDurable PVC shell in Rosslare's black \"cool twist\" shape with a keyring slot. Copper coil antenna paired with an EM4102 or GK4001 read-only IC. Operating frequency 100-150 kHz (125 kHz nominal), read distance up to 20 cm depending on antenna geometry. Contactless passive operation with no battery required. Operating and storage temperature -20°C to 50°C (-4°F to 122°F), humidity 90% non-condensing. Factory-encoded with a unique ID per fob. Ships as a 25-piece pack. Direct replacement for Rosslare AT-R271BL.\u003c\/p\u003e","brand":"Rosslare","offers":[{"title":"Default Title","offer_id":52318392320184,"sku":"AT-ERK-26A7TB0","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/ScreenShot2025-11-24at11.30.07PM.png?v=1764045012"},{"product_id":"ubiquiti-unifi-access-magnetic-lock-540kg","title":"Ubiquiti UniFi Access Magnetic Lock 540 kg (1,200 lb) - Fail-Safe, DPS Sensor, Inswing\/Outswing (UA-LOCK-MAGNETIC-540KG)","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003e1,200 lb Fail-Safe Magnetic Lock with Built-In Door Position Sensor for UniFi Access\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/ubiquiti\"\u003eUbiquiti\u003c\/a\u003e UniFi Access Magnetic Lock (UA-LOCK-MAGNETIC-540KG) is a 540 kg (1,200 lb) holding force electromagnetic lock with a built-in door position switch (DPS) and status LED. It connects to a UniFi Access Hub for centralized door control, scheduling, and audit logging. The fail-safe design releases the door on power loss, meeting fire code requirements for emergency egress without additional hardware.\u003c\/p\u003e\n\u003cp\u003eThe lock mounts on inswing and outswing doors in wood or metal frames. The integrated DPS reports real-time door state (open\/closed) back to the UniFi Access controller, eliminating the need for a separate door contact sensor. When paired with a UniFi Access Reader, the system handles the full access control chain: credential read, authorization decision, lock release, and door-state confirmation in a single integrated platform.\u003c\/p\u003e\n\u003ch3\u003eWhere the 540 kg Magnetic Lock Fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial office entries and suite doors\u003c\/strong\u003e where a single lock needs to secure a standard or heavy door and report its open\/closed state to the UniFi Access dashboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServer rooms and restricted areas\u003c\/strong\u003e where fail-safe operation ensures the door releases during a fire alarm or power outage without manual intervention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarehouse and facility gates\u003c\/strong\u003e where 1,200 lb holding force secures high-traffic doors against forced entry while allowing instant electrical release\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the Magnetic Lock Delivers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e540 kg (1,200 lb) holding force:\u003c\/strong\u003e Secures standard commercial doors against forced entry. The electromagnet holds the armature plate until the Access Hub releases power to the lock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFail-safe operation:\u003c\/strong\u003e Lock releases on power loss. Meets fire code requirements for emergency egress paths. No battery or manual override needed for emergency exit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Door Position Switch (DPS):\u003c\/strong\u003e Reports real-time open\/closed state to the UniFi Access controller. Eliminates a separate door contact sensor and its wiring run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInswing and outswing compatible:\u003c\/strong\u003e Mounting hardware supports both door swing directions. Works on wood and metal doors and frames.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus LED:\u003c\/strong\u003e Visual indication of lock state (engaged\/released) at the lock body for quick field verification during installation and troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuild and Specs\u003c\/h3\u003e\n\u003cp\u003eElectromagnetic door lock for UniFi Access. Holding force: 540 kg (1,190 lb). Fail-safe. Built-in DPS. Status LED. Input: 12V DC, 500 mA. Material: Aluminum and steel. Doors supported: Single (inswing\/outswing, wood\/metal). Connects to UniFi Access Hub. Part Number: UA-LOCK-MAGNETIC-540KG.\u003c\/p\u003e","brand":"Ubiquiti Inc.","offers":[{"title":"Default Title","offer_id":52336813244600,"sku":"UA-LOCK-MAGNETIC-540KG","price":230.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/9110\/4952\/files\/1081773081_1658ab9b-e8cd-45de-a75e-df052ef5484e.jpg?v=1764442458"}],"url":"https:\/\/islandelectricalsupply.com\/collections\/access-control-systems.oembed","provider":"Island Electrical Supply","version":"1.0","type":"link"}