- Description
- Specifications
30-Foot Cat6 Snagless Ethernet Cable with RJ-45 Connectors for Long-Distance Runs, Warehouse Networks, and Multi-Room Installations
The C2G 30ft Cat6 Ethernet Cable (03988) is a 550MHz-rated unshielded twisted pair (UTP) patch cable with snagless molded boots and RJ-45 connectors that provides extended reach for installations where equipment sits far from the nearest wall jack, patch panel, or switch. The 30-foot length handles room-to-room connections through doorways, drop-ceiling cable paths, and along-wall routing without requiring permanent in-wall structured cabling, making it the practical choice for retrofits, temporary deployments, and locations where pulling cable through walls is not feasible.
Built with high-quality copper conductors and individually bonded pairs that maintain twist spacing to the termination point, this cable delivers stable 10/100/1000BASE-T performance with minimal Near-End Crosstalk (NEXT) and structural return loss across the full 30-foot distance. The snagless molded boots at both ends protect the RJ-45 locking tabs during routing through ceiling tiles, cable trays, and along baseboards where longer cables encounter more potential snag points than short patch cords.
Where the C2G 30ft Cat6 Cable Fits
- Warehouse and industrial floor networking where access points, barcode scanners, and IP cameras mount on walls or ceilings far from the nearest network closet, the 30-foot reach connects PoE-powered devices to switches without requiring dedicated cable pulls, and the Cat6 rating handles both data and power delivery across the full distance
- Multi-room office connections where printers, conference displays, and workstations in adjacent rooms need network access from a single data closet or wall jack location, the 30-foot cable routes through doorways, above drop ceilings, or along baseboards, and the black color blends into commercial environments
- Retail and hospitality deployments where point-of-sale terminals, digital signage, and guest-facing kiosks connect to back-of-house network equipment across sales floors and lobbies, the 30-foot length eliminates the need for mid-span switches or repeaters, and the snagless design prevents damage when routing through tight ceiling spaces
What the C2G 30ft Cat6 Cable Delivers
- 30-Foot Cat6 550MHz Cable: 30 feet of Cat6 UTP network cable with RJ-45 male connectors at both ends. Rated for 550MHz bandwidth supporting 10/100/1000BASE-T Ethernet. Full Gigabit performance across the entire 30-foot distance.
- Snagless Molded Boot Design: Strain-relief boots at both ends with snagless covers that protect RJ-45 locking tabs. Essential for longer cables that route through ceiling spaces, cable trays, and tight pathways where snag points are common.
- High-Quality Copper Construction: Bonded twisted pairs maintain precise twist spacing to the termination point, minimizing NEXT and structural return loss. Consistent signal integrity across all four pairs for full-duplex Gigabit operation at distance.
- Extended Reach Without Infrastructure: 30-foot length connects equipment across rooms, floors, and open spaces without permanent in-wall cable installation. Ideal for retrofits, temporary setups, and locations where cable pulling is impractical.
- Lifetime Warranty: Backed by C2G lifetime warranty for long-term deployment reliability across commercial and institutional network installations.
