- Description
- Specifications
IP65 Weatherproof Piezoelectric Exit Button with Programmable LED Ring, Stainless Steel Faceplate, and SPDT Relay Output for Indoor and Outdoor Access Control
The Seco-Larm SD-6176-SS1Q is a piezoelectric push to exit button with no moving parts, an IP65-rated weatherproof housing, and a stainless steel faceplate built for high-traffic indoor and outdoor access control installations. The touch-activated piezoelectric sensor eliminates mechanical wear, making the button reliable in environments where traditional pushbuttons fail from repeated use, vandalism, or moisture exposure. A programmable ring LED provides visible activation feedback with reversible red-to-green or green-to-red color sequences, and the SPDT relay output rated at 2.5A at 24 VAC/VDC integrates directly with electric strikes, magnetic locks, and access control panels.
The SD-6176-SS1Q operates on 12 to 24 VDC and draws 40mA at 12VDC in standby. The relay output mode is adjustable from 1 to 30 seconds timed release or toggle operation, matching the requirements of different door hardware configurations. The slimline stainless steel faceplate resists corrosion, cleaning chemicals, and physical abuse in demanding environments. ETL listed and conforming to UL Standard 294, the button meets the code requirements for commercial egress control installations.
Where the SD-6176-SS1Q Fits
- Outdoor gates and parking garages where the exit button is exposed to rain, humidity, and temperature swings, and the IP65 rating and stainless steel construction prevent corrosion and water intrusion that would disable a standard mechanical button
- Hospitals, clean rooms, and food processing facilities where a touch-activated button with no moving parts supports hygiene protocols and withstands repeated cleaning with disinfectants and chemical agents
- Schools, warehouses, and high-traffic commercial doors where the piezoelectric sensor handles thousands of daily activations without mechanical fatigue, and the programmable LED ring confirms each activation to the user
What the SD-6176-SS1Q Delivers
- Piezoelectric touch activation with no moving parts: The solid-state sensor responds to a light touch without any mechanical button travel. No springs, no contacts to wear out, and no gap for moisture or debris to enter the switch mechanism.
- IP65 weatherproof rating: Full protection against dust ingress and low-pressure water jets from any direction. The sealed housing and stainless steel faceplate handle direct outdoor exposure without degradation.
- Programmable ring LED with color feedback: The LED ring around the touch zone changes color on activation with a reversible red-to-green or green-to-red sequence. Visual feedback confirms the button press registered and the relay fired.
- SPDT relay output at 2.5A: The relay output rated at 2.5A at 24 VAC/VDC drives electric strikes, magnetic locks, and gate operators directly. Adjustable timing from 1 to 30 seconds or toggle mode matches any door hardware configuration.
- ETL listed, UL 294 compliant: Third-party tested and listed to meet UL Standard 294 for access control system equipment. The ETL listing satisfies building code and insurance requirements for commercial egress installations.
