- Description
- Specifications
48-Port Layer 3 PoE+++ Switch with 32x 10G and 16x 2.5G Access Ports, 25G SFP28 Uplinks, 920 Gbps Switching, and Pro AV Profiles
The Ubiquiti UniFi Pro XG 48 PoE is the highest-density multi-gigabit PoE switch in the UniFi lineup, delivering 48 PoE+++ ports with up to 90W per port across a mix of 32 10G RJ45 and 16 2.5G RJ45 connections. Four 25G SFP28 uplinks connect to your backbone at speeds that keep pace with 920 Gbps total switching capacity. With a 1,080W PoE budget at 200-240V, it powers an entire floor of WiFi 7 access points, PTZ cameras, and high-wattage devices from a single 1U chassis without external injectors or secondary power sources.
Layer 3 inter-VLAN routing, 684 Mpps forwarding, and built-in Pro AV traffic profiles for Dante, NDI, Q-SYS, and SDVoE make the USW-Pro-XG-48-PoE equally suited for enterprise data networks and professional audiovisual installations. Etherlighting provides per-port LED diagnostics through the UniFi dashboard, the 1.3-inch touchscreen LCM shows real-time status at the rack, and DC power backup via the USP-RPS adds redundancy for always-on deployments. Managed through the same UniFi interface as every other device in the ecosystem.
Where the USW-Pro-XG-48-PoE Fits
- Enterprise distribution closets and campus cores where 32 devices need 10G access ports with PoE+++ and the remaining 16 ports serve 2.5G endpoints, all powered from a single switch with 1,080W available across all 48 ports
- Professional AV installations and broadcast facilities where Dante audio endpoints, NDI video sources, and control devices require dedicated 10G ports with Pro AV traffic profiles that prioritize low-latency media transport over standard data
- High-density WiFi 7 deployments where every access point connects at 10G to match the combined throughput of WiFi 7 radios, draws up to 90W for integrated directional antennas, and the 25G uplinks prevent aggregation bottlenecks
What the USW-Pro-XG-48-PoE Delivers
- 48 PoE+++ ports at 10G and 2.5G: Thirty-two 10G RJ45 and sixteen 2.5G RJ45 ports, each delivering up to 90W via 802.3bt Type 4. Total PoE budget of 1,080W at 200-240V powers your highest-wattage devices without external injectors.
- 25G SFP28 uplinks: Four dedicated uplink slots running at 25G for fiber or DAC connections to your core infrastructure. Prevents uplink congestion when dozens of 10G access ports are active simultaneously.
- 920 Gbps switching with Layer 3: Non-blocking forwarding at 684 Mpps with on-switch inter-VLAN routing, DHCP server and relay, static routing, and 128,000 MAC address table entries. Routes between segments without an external gateway.
- Pro AV traffic profiles: Built-in optimization for Dante, NDI, Q-SYS, SDVoE, Shure, AES67, and Crestron. Single-click AV-grade QoS configuration replaces manual DSCP rules and multicast tuning.
- Etherlighting and touchscreen LCM: Per-port RGB LEDs controllable from the UniFi dashboard for visual troubleshooting and port identification. 1.3-inch touchscreen shows switch status, port utilization, and alerts at the rack.
